Hi,
> On an EnGenius ESR1750 running current trunk (r46386), the ath10k driver fails
> to load the firmware blob - it did work in Barrier Breaker though. Here's the
> failing dmesg bits:
It seems this board ran uncalibrated on BB and CC, which is no longer possible
after my patches on trunk. A correct entry needs to be added to
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata in
order to upload calibration data to the firmware. It should be rather easy, but
if you don’t feel like doing it yourself, I could make a patch if you could
tell me where on flash the calibration data and mac address are located.
Matti
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
