Hi,
What's the difference between following 2 methods in package makefile:
1) PKG_INSTALL:=1
logs:
make[2]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/package/libs/toolchain'
make[2]: Entering directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/package/radvd-2.11'
make[2]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/package/radvd-2.11'
make[1]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt'
2)
define Package/radvd-2.11/install
$(call Build/Install/Default)
endef
logs:
make[3]: Entering directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11'
make[4]: Entering directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11'
/bin/mkdir -p
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/sbin'
/usr/bin/install -c radvd radvdump
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/sbin'
/bin/mkdir -p
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/share/man/man5'
/usr/bin/install -c -m 644 radvd.conf.5
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/share/man/man5'
/bin/mkdir -p
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/share/man/man8'
/usr/bin/install -c -m 644 radvd.8 radvdump.8
'/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11/ipkg-install/usr/share/man/man8'
make[4]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11'
make[3]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/build_dir/target-mipsel_mips32_uClibc-0.9.33.2/radvd-2.11'
SHELL=
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/host/bin/flock
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/tmp/.root-copy.flock
-c 'cp -fpR
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/root-malta/tmp-radvd-2.11/.
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/root-malta/'
rm -rf
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/root-malta/tmp-radvd-2.11
touch
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/root-malta/stamp/.radvd-2.11_installed
if [ -f
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/pkginfo/radvd-2.11.default.install.clean
]; then rm -f
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/pkginfo/radvd-2.11.default.install
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/pkginfo/radvd-2.11.default.install.clean;
fi; echo "radvd-2.11" >>
/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/staging_dir/target-mipsel_mips32_uClibc-0.9.33.2/pkginfo/radvd-2.11.default.install
make[2]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt/package/radvd-2.11'
make[1]: Leaving directory
`/home/pratik.prajapati/work/openwrt-radvd/openwrt-tip/openwrt'
Using second method I was able to install package but not with 1st method.
For 1st method following was written here
http://wiki.openwrt.org/doc/devel/packages#dependencytypes:
PKG_INSTALL - Setting it to "1" will call the package's original "make
install" with prefix set to PKG_INSTALL_DIR
Is I am missing something for 1st method ?
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
