On 09/07/2015 09:42, Guenther Kelleter wrote: > Hi > >> -----Original Message----- >> From: John Crispin [mailto:blo...@openwrt.org] >> Sent: Thursday, July 09, 2015 8:24 AM >> To: Guenther Kelleter; openwrt-devel@lists.openwrt.org >> Subject: Re: [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field >> supported >> >> Hi, >> >> On 07/07/2015 14:58, Günther Kelleter wrote: >>> to allow target specific override of phydev->supported. >>> >> >> why do you need to do this ? do you want to force a specific link type ? >> if so, then using a fixed link would be preferable to faking phy caps > > > It simply doesn't work with autoneg on. The plc chip on the other end of eth0 > doesn't sync. How can I force no autoneg 1000 full duplex on eth0 without > this patch? > I'm setting (see patch 3/7, > target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c) > + ath79_eth0_data.speed = SPEED_1000; > + ath79_eth0_data.duplex = DUPLEX_FULL; > But this has no effect. > >
ok, it looked something like this. gimme a day to figure out why explicitly setting up the speed does not work. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
