2015-06-07 19:24 GMT+02:00 Baptiste Clenet <bapcle...@gmail.com>: > > Le 6 juin 2015 15:40, "Roman Yeryomin" <leroi.li...@gmail.com> a écrit : >> > >> On 6 June 2015 at 09:21, Dirk Neukirchen <dirkneukirc...@web.de> wrote: >> > On 05.06.2015 16:00, Baptiste Clenet wrote: >> >> Hi OpenWRT developers, >> >> >> >> Is there any plan to port OPENWRT on Linux 4.x? (Or is it already >> >> done?) >> >> >> >> >> > >> > >> > - ar71xx: ar8216/ar8316/ar8xxx driver is broken >> > on 8337N and some unknown router (reported yesterday on IRC) >> > look at [3] if anybody is interested >> >> That was me, probably. I'm trying 4.0.4 on several ar71xx routers/APs, >> mostly Ubiquiti. All have the same problem: >> http://p.tet.rtu.lv/pbzn5sspm/wvtsep/raw >> I think the problem is inside ag71xx (ethernet driver) and related to >> timers and/or interrupts but not sure. >> >> Regards, >> Roman >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > Hi, > Thanks for your answer, I'm using the board Ralink MT7628. I've just seen > that MT7628 board has Linux 3.18 as default. May I change to Linux 4.0.4 ? > Will it work ? I'm going to try tomorrow. > > Cheers, > > Baptiste
I've edited variable KERNEL_PATCHVER:=3.18 to KERNEL_PATCHVER:=4.0.4 in target/Linux/ramips/Makefile in order to get Linux 4.0.4 installed and I got an error: touch /trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/.quilt_used touch /trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/.prepared if [ -s "/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/patches/series" ]; then (cd "/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4"; if quilt --quiltrc=- next >/dev/null 2>&1; then quilt --quiltrc=- push -a; else quilt --quiltrc=- top >/dev/null 2>&1; fi ); fi touch "/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/.quilt_checked" /trunk/scripts/kconfig.pl > /trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/.config.target Parse error at 3/trunk/scripts/kconfig.pl line 137. make[4]: *** [/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7628/linux-4.0.4/.configured] Error 255 make[4]: Leaving directory `/trunk/target/linux/ramips' make[3]: *** [compile] Error 2 make[3]: Leaving directory `/trunk/target/linux' make[2]: *** [target/linux/compile] Error 2 make[2]: Leaving directory `/trunk' make[1]: *** [/trunk/staging_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/stamp/.target_compile] Error 2 make[1]: Leaving directory `/trunk' make: *** [world] Erreur 2 Cheers, Baptiste _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
