I've seen a similar issue with the toshiba wlm20u2 where it says it's transferring htc_9271.fw but that's actually the wrong fw so the device crashes, the solution for me was to specify the device as AR9280_USB in the ath9k_hif_usb_ids struct as per the following: https://github.com/cjdelisle/athdrvrs/blob/master/ath9k/hif_usb.c#L59
Maybe this is helpful... On 05/25/2015 05:59 PM, Luca Olivetti wrote: > El 25/05/15 a les 17:27, Bruno Randolf ha escrit: >> On 05/25/2015 03:38 PM, Luca Olivetti wrote: >>> This is the message I get when I plug a tp-link tl-wn722n (which is >>> working fine both in an ubuntu desktop and on a mageia laptop): >>> >>> >>> [ 547.804000] usb 1-1: new high-speed USB device number 5 using ifxusb_hcd >>> [ 548.020000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested >>> [ 549.296000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 50980 >>> [ 550.304000] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive >>> [ 550.308000] ath9k_htc: Failed to initialize the device >>> >>> >>> Just to exclude a problem with the usb port, I tried with an rt73 based >>> stick I have and it works fine. >>> I have a different firmware on my desktop system, I tried it but the >>> result is the same. >>> >>> This is with openwrt trunk on an astoria arv7518pw (lantiq xway) >> >> Maybe a problem with the USB power supply. Can you try with a powered >> USB hub? > > Yes, I thought so, but I don't have a powered usb hub :-/ > > Bye > -- Satire is the escape hatch from the cycle of sorrow, hatred and violence. #JeSuisCharlie _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
