Hi Thomas, On Thu, May 21, 2015 at 12:37:35PM +0000, thomas.lan...@lantiq.com wrote: > I checked the downloads, e.g here > http://downloads.openwrt.org/chaos_calmer/15.05-rc1/lantiq/xrx200/ > and saw that only one image per subtarget is built. > As the image-creation is tied to the profiles, the buildbot probably need to > build for each profile. > > John: Do you know if it is possible to add a "generic" profile to build all > images in one run? > Or why it is necessary to select a specific model for the build?
Having a generic profile was not intended in the way image creation was previously implemented. This is a known problem on all device-tree-based targets and the reason for framework changes which would by now allow doing this properly. Targets will have to pick-up the new image building code Felix introduced in r43907 (which was improved a lot since and was already used to replace the old approach for quite some boards) However, having it implemented for all boards in 15.05 is not realistic imho. Thus the final build will hopefully run for each profile. (John, Kaloz: will it?) Cheers Daniel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
