On Wed, May 13, 2015 at 12:35 PM, Conor O'Gorman <i...@conorogorman.net> wrote: > On 12/05/15 17:57, Jakub Jančo wrote: >> >> Hello, >> >> I have tplink 1043nd with BB >> >> Problem is that I have dhcp client on WAN and if I unplug cable from >> WAN, it doesnt change status, give up dhcp address. >> >> Even worse is that if I plug cable with another end point with another >> network, WAN dhcp client doesnt pull new IP, I must click on "Connect" >> to refresh dhcp client, then new ip is assigned and internet works. Or >> restart device. > > > Have a look at ifpugd. > > But maybe netifd should/could/might do something for this scenario? > > Conor > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel netifd has support for link state changes; the network interface will be brought up/down if the link is active/inactive. However if the force_link parameter is enabled for a network interface netifd will ignore link state changes.
Hans _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
