The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.
Signed-off-by: Sven Eckelmann <s...@open-mesh.org>
---
target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
index 272e410..298e80c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
@@ -202,7 +202,7 @@ static void __init om5p_an_setup(void)
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = BIT(7);
- ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+ ath79_eth0_pll_data.pll_1000 = 0x02000000;
ath79_eth0_pll_data.pll_100 = 0x00000101;
ath79_eth0_pll_data.pll_10 = 0x00001313;
ath79_register_eth(0);
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
