From: 盛凯 <shengka...@gmail.com> Sorry,Sheng Kai told me that the flash layout is wrong in his previous patch-_-!!
From: 盛凯 <shengka...@gmail.com> v3:fix flash layout and change model name v2:fix space issues MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengka...@gmail.com> --- .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/MicroWRT.dts | 107 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + target/linux/ramips/mt7620/profiles/microwrt.mk | 9 ++ 6 files changed, 124 insertions(+) create mode 100644 target/linux/ramips/dts/MicroWRT.dts create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index d4ec19d..24e1ba8 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -45,6 +45,7 @@ ramips_setup_interfaces() 3g150b | \ 3g300m | \ + microwrt | \ w150m | \ zte-q7 | \ all0256n | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index fc6eb37..dffa832 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -202,6 +202,9 @@ ramips_board_detect() { *"Planex MZK-750DHP") name="mzk-750dhp" ;; + *"Microduino MicroWRT") + name="microwrt" + ;; *"NBG-419N") name="nbg-419n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a5773b5..17b456b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -60,6 +60,7 @@ platform_check_image() { m2m | \ m3 | \ m4 | \ + microwrt | \ mlw221 | \ mlwg2 | \ mofi3500-3gn | \ diff --git a/target/linux/ramips/dts/MicroWRT.dts b/target/linux/ramips/dts/MicroWRT.dts new file mode 100644 index 0000000..9500b14 --- /dev/null +++ b/target/linux/ramips/dts/MicroWRT.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "microwrt", "ralink,mt7620a-soc"; + model = "Microduino MicroWRT"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0xfc0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "wled", "i2c", "wdt", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 2 1>; + linux,code = <0x211>; + }; + }; + }; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 743f7b4..e6b5112 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -865,6 +865,8 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) +microwrt_mtd_size=16515072 +Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size)) ifeq ($(SUBTARGET),mt7620) @@ -895,6 +897,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) + $(call Image/Build/Profile/MicroWRT,$(1)) endef endif diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk b/target/linux/ramips/mt7620/profiles/microwrt.mk new file mode 100644 index 0000000..38213ac --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk @@ -0,0 +1,9 @@ +define Profile/MicroWRT + NAME:=Microduino MicroWRT + PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci +endef + +define Profile/MicroWRT/Description + Package set compatible with MicroWRT +endef +$(eval $(call Profile,MicroWRT)) -- 2.1.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
