Sorry I forgot to edit the title.This is a router with MT7620a SoC so it belongs to ramips target.
2015-03-31 19:38 GMT+08:00 郭传鈜 <gch981...@gmail.com>: > ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery. > I can,t find any information about this router on ZTE's website. > But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 > This router is the same as ZTE Q7 and later I found that both routers are > made by the same company:-D > > This patch adds support for it. > Because there is only one port,I disabled VLAN and use eth0 as lan port. > I could only create a sysupgrade firmware because I don't know how the > orignal webpage check the uploaded image:-( > Signed-off-by: 郭传鈜 <gch981...@gmail.com> > > --- > target/linux/ramips/base-files/etc/board.d/01_leds | 3 + > .../linux/ramips/base-files/etc/board.d/02_network | 1 + > target/linux/ramips/base-files/etc/diag.sh | 3 + > target/linux/ramips/base-files/lib/ramips.sh | 3 + > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/ZTE-Q7.dts | 111 > +++++++++++++++++++++ > target/linux/ramips/image/Makefile | 2 + > 7 files changed, 124 insertions(+) > create mode 100644 target/linux/ramips/dts/ZTE-Q7.dts > > diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds > b/target/linux/ramips/base-files/etc/board.d/01_leds > index bfe1c0c..56ba3b7 100755 > --- a/target/linux/ramips/base-files/etc/board.d/01_leds > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds > @@ -237,6 +237,9 @@ case $board in > set_usb_led "lenovo:blue:usb" > set_wifi_led "lenovo:blue:wifi" > ;; > + zte-q7) > + set_wifi_led "zte:blue:status" > + ;; > esac > > board_config_flush > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index 89d1681..d4ec19d 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -46,6 +46,7 @@ ramips_setup_interfaces() > 3g150b | \ > 3g300m | \ > w150m | \ > + zte-q7 | \ > all0256n | \ > all5002 | \ > all5003 | \ > diff --git a/target/linux/ramips/base-files/etc/diag.sh > b/target/linux/ramips/base-files/etc/diag.sh > index 50b6ff2..5301593 100644 > --- a/target/linux/ramips/base-files/etc/diag.sh > +++ b/target/linux/ramips/base-files/etc/diag.sh > @@ -224,6 +224,9 @@ get_status_led() { > y1s) > status_led="lenovo:blue:power" > ;; > + zte-q7) > + status_led="zte:red:status" > + ;; > esac > } > > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index 4527414..fc6eb37 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -379,6 +379,9 @@ ramips_board_detect() { > *"ZBT WR8305RT") > name="wr8305rt" > ;; > + *"ZTE Q7") > + name="zte-q7" > + ;; > *"Lenovo Y1") > name="y1" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index fffbe72..a5773b5 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -114,6 +114,7 @@ platform_check_image() { > xiaomi-miwifi-mini |\ > y1 |\ > y1s |\ > + zte-q7 |\ > zbt-wa05) > [ "$magic" != "27051956" ] && { > echo "Invalid image type." > diff --git a/target/linux/ramips/dts/ZTE-Q7.dts > b/target/linux/ramips/dts/ZTE-Q7.dts > new file mode 100644 > index 0000000..9efc35e > --- /dev/null > +++ b/target/linux/ramips/dts/ZTE-Q7.dts > @@ -0,0 +1,111 @@ > +/dts-v1/; > + > +/include/ "mt7620a.dtsi" > + > +/ { > + compatible = "ZTE-Q7", "ralink,mt7620a-soc"; > + model = "ZTE Q7"; > + > + palmbus@10000000 { > + > + gpio0: gpio@600 { > + status = "okay"; > + }; > + > + gpio1: gpio@638 { > + status = "okay"; > + }; > + > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "en25q64"; > + reg = <0 0>; > + linux,modalias = "m25p80", "en25q64"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0x7b0000>; > + }; > + }; > + }; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "i2c", "uartf", "rgmii1", > "rgmii2", "ephy", "wled", "nd_sd"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + ethernet@10100000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ephy_pins>; > + mtd-mac-address = <&factory 0x4>; > + ralink,port-map = "wllll"; > + }; > + > + wmac@10180000 { > + ralink,mtd-eeprom = <&factory 0>; > + }; > + > + sdhci@10130000 { > + status = "okay"; > + }; > + > + ehci@101c0000 { > + status = "okay"; > + }; > + > + ohci@101c1000 { > + status = "okay"; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + statred { > + label = "zte:red:status"; > + gpios = <&gpio0 13 1>; > + }; > + statblue { > + label = "zte:blue:status"; > + gpios = <&gpio0 9 1>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + reset { > + label = "reset"; > + gpios = <&gpio1 2 1>; > + linux,code = <0x198>; > + }; > + }; > +}; > diff --git a/target/linux/ramips/image/Makefile > b/target/linux/ramips/image/Makefile > index 45ae3a5..bc1fe181 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -862,6 +862,7 @@ Image/Build/Profile/WR8305RT=$(call > BuildFirmware/Default8M/$(1),$(1),wr8305rt,W > Image/Build/Profile/WRTNODE=$(call > BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) > Image/Build/Profile/WT3020=$(call > BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) > Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call > BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI) > +Image/Build/Profile/ZTE-Q7=$(call > BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) > Image/Build/Profile/ZBT-WA05=$(call > BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) > Image/Build/Profile/ArcherC20i=$(call > BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) > > @@ -891,6 +892,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/WRTNODE,$(1)) > $(call Image/Build/Profile/WT3020,$(1)) > $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1)) > + $(call Image/Build/Profile/ZTE-Q7,$(1)) > $(call Image/Build/Profile/ZBT-WA05,$(1)) > $(call Image/Build/Profile/ArcherC20i,$(1)) > endef > -- > 2.1.0 > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
