2015-03-17 23:15 GMT+03:00 Stefan Rompf <ste...@loplof.de>: >> Possibly, you could see some changes during change. Try check GPIO >> pins with oscillograph during channel change. > > Unfortunately opening the case is not an option. > You should be a wizard to reveal hw protocol without touching hw :)
>> Or you could put device in continuous scan (e.g. use STA mode and >> enter some not available SSID to put device for infinite AP search) > > Interesting enough: When stopping all wifi related software on the device and > creating a monitor interface, the RF filter seems to follow "iwconfig channel" > commands (yes it is the madwifi driver). How do you realized that RF filter follows "iwconfig channel" command? > So the magic happens in iwconfig or the driver, not in some userspace > daemon. Unlikely that iwconfig changes something directly, I would bet on the driver. -- Sergey _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
