This patch fixes the failsafe switch workaround to avoid soft-bricking routers where the only exposed Ethernet port is not 0 (it is 4 for the HT-TM02 for instance).
This is a follow-up of http://patchwork.ozlabs.org/patch/424017/ (sorry for the delay). Signed-off-by: Vittorio Gambaletta <open...@vittgam.net> diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips index cae6396..efdc5fd 100644 --- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips +++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips @@ -20,7 +20,7 @@ ramips_set_preinit_iface() { # disabled: # https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg19870.html swconfig dev rt305x set enable_vlan 1 - swconfig dev rt305x vlan 1 set ports "0 6" + swconfig dev rt305x vlan 1 set ports "0 1 2 3 4 5 6" swconfig dev rt305x port 6 set untag 0 swconfig dev rt305x set apply 1 vconfig add eth0 1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
