On Fri, Feb 20, 2015 at 1:08 PM, dani <dgcb...@gmail.com> wrote:
> This adds support for the Netgear DGND3700 v1 and DGND3800B.
Thanks, I have one lying around but never got around to properly
adding support for it. A few things before I can commit it ...
> DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
> the factory firmware. This patch produces two factory firmwares for each
> router.
> The miniPCI card have two radios, I included sprom fixups bor both spite wifi
> works
> ok without it.
At least my dgnd3700 has properly populated/valid sproms on the card
and does not need any fixups, so I wonder where you took the values
from.
Also I added DT support for the gpio drivero (finally), so please move
any buttons/leds to it. Should also help to reduce the patch size.
> The router includes an onboard NAND flash for extra storage. NAND is currently
> not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
> is enough for storing an openwrt firmware.
Makes sense if there is no driver.
(snip)
> diff --git a/target/linux/brcm63xx/image/Makefile
> b/target/linux/brcm63xx/image/Makefile
> index fd1e157..4520f06 100755
> --- a/target/linux/brcm63xx/image/Makefile
> +++ b/target/linux/brcm63xx/image/Makefile
> @@ -105,6 +105,11 @@ define Image/Build/HCS
> --output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
> endef
>
> +define Image/Build/Chk
> + $(STAGING_DIR_HOST)/bin/mkchkimg -o
> $(BIN_DIR)/openwrt-$(5)-$(1)-factory.chk \
> + -k $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin -b $(3) -r $(4)
> +endef
> +
> define Build/Clean
> $(MAKE) -C lzma-loader clean
> endef
> @@ -209,6 +214,11 @@ define Image/Build
> # build dtb image list
> $(foreach image,$(TARGET_$(PROFILE)_IMAGES),$(call
> Image/Build/$(image),$(1)))
>
> + #Netgear DGND3700 v1 factory firmware
> + $(call
> Image/Build/Chk,$(1),DGND3700v1_3800B,U12L144T01_NETGEAR_NEWLED,1,DGND3700v1)
> + #Netgear DGND3800B factory firmware
> + $(call
> Image/Build/Chk,$(1),DGND3700v1_3800B,U12L144T11_NETGEAR_NEWLED,1,DGND3800B)
> +
Please don't add any further calls here but instead let the ImageDTB
call an aprpriate define that does these wraps.
> ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
> $(call Image/Build/Initramfs)
> endif
> @@ -298,6 +308,8 @@ $(eval $(call
> ImageDTB,CFEDTB,HG556a_AB,hg556a-b,HW556,6358,HG556a_B,--rsa-signa
> $(eval $(call
> ImageDTB,CFEDTB,HG556a_C,hg556a-c,HW556,6358,HG556a_C,--rsa-signature
> "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version
> 8))
> # Netgear DG834GT/PN
> $(eval $(call
> ImageDTB,CFEDTB,DG834GTPN,dg834gtpn,96348GW-10,6348,DG834GT_PN))
> +# Netgear DGND3700 v1 / DGND3800B
> +$(eval $(call
> ImageDTB,CFEDTB,DGND3700v1_3800B,dgnd3700v1,96368MVWG,6368,DGND3700v1_3800B,--image-offset
> 0x20000 --block-size 0x20000))
> # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
> $(eval $(call
> ImageDTB,CFEDTB,AGPF_S0,agpf-s0,AGPF-S0,6358,AGV2+W,--block-size 0x20000
> --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
> # Pirelli A226G
> diff --git a/target/linux/brcm63xx/profiles/netgear.mk
> b/target/linux/brcm63xx/profiles/netgear.mk
> index 562e0f5..a731b36 100644
> --- a/target/linux/brcm63xx/profiles/netgear.mk
> +++ b/target/linux/brcm63xx/profiles/netgear.mk
> @@ -13,3 +13,13 @@ define Profile/DG834GTPN/Description
> Package set optimized for DG834GT/PN.
> endef
> $(eval $(call Profile,DG834GTPN))
> +
> +define Profile/DGND3700v1_3800B
> + NAME:=Netgear DGND3700 v1 / DGND3800B
> + PACKAGES:=kmod-b43 wpad-mini \
> + kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
> +endef
> +define Profile/DGND3700v1_3800B/Description
> + Package set optimized for DGND3700 v1 / DGND3800B.
> +endef
> +$(eval $(call Profile,DGND3700v1_3800B))
> diff --git a/target/linux/brcm63xx/dts/dgnd3700v1.dts
> b/target/linux/brcm63xx/dts/dgnd3700v1.dts
> new file mode 100644
> index 0000000..a647476
> --- /dev/null
> +++ b/target/linux/brcm63xx/dts/dgnd3700v1.dts
> @@ -0,0 +1,36 @@
> +/dts-v1/;
> +
> +/include/ "bcm6368.dtsi"
> +
> +/ {
> + model = "Netgear DGND3700v1/DGND3800B";
> + compatible = "netgear,dgnd3700v1", "brcm,bcm6368";
> +};
> +
> +&pflash {
> + status = "ok";
> +
> + linux,part-probe = "bcm63xxpart";
> +
> + cfe@0 {
> + label = "CFE";
> + reg = <0x000000 0x020000>;
> + read-only;
> + };
> +
> + linux@20000 {
> + label = "linux";
> + reg = <0x020000 0x1e20000>;
> + };
> +
> + netgear_parts@1e40000 {
> + label = "netgear_parts";
Let's call this partition board_data, like it is done for other targets.
Jonas
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
