On Sun, Jan 25, 2015 at 6:36 PM, Álvaro Fernández Rojas
<nolt...@gmail.com> wrote:
I decided to not apply this and instead directly move the buttons/led
to the dts files and remove them from the board_info structs, so there
should be no conflict potential.
> Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
> ---
> diff --git a/target/linux/brcm63xx/patches-3.14/377-DT-GPIO-over-legacy.patch
> b/target/linux/brcm63xx/patches-3.14/377-DT-GPIO-over-legacy.patch
> new file mode 100644
> index 0000000..f56c8ca
> --- /dev/null
> +++ b/target/linux/brcm63xx/patches-3.14/377-DT-GPIO-over-legacy.patch
> @@ -0,0 +1,43 @@
> +--- a/arch/mips/bcm63xx/boards/board_common.c
> ++++ b/arch/mips/bcm63xx/boards/board_common.c
> +@@ -204,6 +204,10 @@ int __init board_register_devices(void)
> + }
> + #endif
> +
> ++ if (!board_of_device_present("gpio0")) {
> ++ bcm63xx_gpio_init();
> ++ }
> ++
> + if (board.has_uart0)
> + bcm63xx_uart_register(0);
> +
> +@@ -269,7 +273,7 @@ int __init board_register_devices(void)
> + while (led_count < ARRAY_SIZE(board.leds) &&
> board.leds[led_count].name)
> + led_count++;
> +
> +- if (led_count) {
> ++ if (led_count && !board_of_device_present("gpio0")) {
> + bcm63xx_led_data.num_leds = led_count;
> + bcm63xx_led_data.leds = board.leds;
> +
> +@@ -284,7 +288,7 @@ int __init board_register_devices(void)
> + while (button_count < ARRAY_SIZE(board.buttons) &&
> board.buttons[button_count].desc)
> + button_count++;
> +
> +- if (button_count) {
> ++ if (button_count && !board_of_device_present("gpio0")) {
> + bcm63xx_gpio_keys_data.nbuttons = button_count;
> + bcm63xx_gpio_keys_data.buttons = board.buttons;
> +
> +--- a/arch/mips/bcm63xx/prom.c
> ++++ b/arch/mips/bcm63xx/prom.c
> +@@ -54,9 +54,6 @@ void __init prom_init(void)
> + reg &= ~mask;
> + bcm_perf_writel(reg, PERF_CKCTL_REG);
> +
> +- /* register gpiochip */
> +- bcm63xx_gpio_init();
> +-
> + /* detect and setup flash access */
> + bcm63xx_flash_detect();
> +
> diff --git a/target/linux/brcm63xx/patches-3.18/375-DT-GPIO-over-legacy.patch
> b/target/linux/brcm63xx/patches-3.18/375-DT-GPIO-over-legacy.patch
> new file mode 100644
> index 0000000..f56c8ca
> --- /dev/null
> +++ b/target/linux/brcm63xx/patches-3.18/375-DT-GPIO-over-legacy.patch
> @@ -0,0 +1,43 @@
> +--- a/arch/mips/bcm63xx/boards/board_common.c
> ++++ b/arch/mips/bcm63xx/boards/board_common.c
> +@@ -204,6 +204,10 @@ int __init board_register_devices(void)
> + }
> + #endif
> +
> ++ if (!board_of_device_present("gpio0")) {
> ++ bcm63xx_gpio_init();
> ++ }
> ++
> + if (board.has_uart0)
> + bcm63xx_uart_register(0);
> +
> +@@ -269,7 +273,7 @@ int __init board_register_devices(void)
> + while (led_count < ARRAY_SIZE(board.leds) &&
> board.leds[led_count].name)
> + led_count++;
> +
> +- if (led_count) {
> ++ if (led_count && !board_of_device_present("gpio0")) {
> + bcm63xx_led_data.num_leds = led_count;
> + bcm63xx_led_data.leds = board.leds;
> +
> +@@ -284,7 +288,7 @@ int __init board_register_devices(void)
> + while (button_count < ARRAY_SIZE(board.buttons) &&
> board.buttons[button_count].desc)
> + button_count++;
> +
> +- if (button_count) {
> ++ if (button_count && !board_of_device_present("gpio0")) {
> + bcm63xx_gpio_keys_data.nbuttons = button_count;
> + bcm63xx_gpio_keys_data.buttons = board.buttons;
> +
> +--- a/arch/mips/bcm63xx/prom.c
> ++++ b/arch/mips/bcm63xx/prom.c
> +@@ -54,9 +54,6 @@ void __init prom_init(void)
> + reg &= ~mask;
> + bcm_perf_writel(reg, PERF_CKCTL_REG);
> +
> +- /* register gpiochip */
> +- bcm63xx_gpio_init();
> +-
> + /* detect and setup flash access */
> + bcm63xx_flash_detect();
> +
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
