Hi Alan,
On Feb 15, 2015, at 15:39 , Alan Jenkins <alan.christopher.jenk...@gmail.com>
wrote:
> Hi Toke
>
> I tried installing sqm-scripts from trunk, on Barrier Breaker on my wndr3800.
>
> It's very effective, but I notice SQM isn't applied at boot time. The system
> log complains about pppoe-wan interface not existing, when the sqm init
> script is started.
>
> My guess is it'd be the same even if my WNDR was running the base system from
> trunk. Because the sqm scripts don't have nice integration like the qos
> scripts package.
>
> Is that useful enough as a bug report? Do you need me to work on a proper
> patch?
>
> qos-scripts has a hotplug script, so I copied it for sqm and the problem is
> "fixed". Though my stupid script re-runs the sqm as every single network
> interface comes up, so it spams the log and probably slows things down a bit.
>
I will see how it looks if the hot plug script decides more
intelligently whether to call sqm or not, but I will need a few days due to
unrelated deadlines...
> (Maybe sqm script also wants to not be so noisy in the log)
As far as I am concerned SQM is still on probation (in the openwrt
repository) and has not seen sufficient testing, so the output is verbose to
facilitate debugging of remote issues. I might be wrong though and all is well,
and it can be toned down a lot...
>
> cat <<EOF > /etc/hotplug.d/iface/10-sqm
> #!/bin/sh
>
> # my sqm isn't being enabled on boot
> # cargo-cult this hotplug script from qos-scripts
>
> [ "$ACTION" = ifup ] && /etc/init.d/sqm enabled && /usr/lib/sqm/run.sh
> EOF
I will, if you do not mind take this as starting point for a slightly
more selective hot plug script…
Best Regards
Sebastian
> _______________________________________________
> Cerowrt-devel mailing list
> cerowrt-de...@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
