Roger Pueyo Centelles schrieb am 26.01.2015 um 18:10:
> Hi,
>
> Thank you both for your comments.
>
> @郭传鈜:
>
>>> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g"
>>> "phy1tpt"
>> I think the following line is incorrect:
>>> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g"
>>> "phy0tpt"
>> There is no LED trigger called 'phy0tpt' so I think we should use netdev
>> trigger like this:
>> ucidef_set_led_netdev "wlan5g" "WLAN5G" "mercury:green:wlan5g" "wlan0"
>
> Ok!
>
>
>>> +static struct gpio_keys_button mac1200r_gpio_keys[] __initdata = {
>>> + {
>>> + .desc = "WPS button",
>>> + .type = EV_KEY,
>>> + .code = KEY_WPS_BUTTON,
>>> + .debounce_interval = MAC1200R_KEYS_DEBOUNCE_INTERVAL,
>>> + .gpio = MAC1200R_GPIO_BTN_WPS,
>>> + .active_low = 1,
>>> + },
>>> +};
>> Although the key is called WPS/RESET , I think a reset button is more
>> important than a WPS button.That's just my personal opinion :)
>
> I think you are right.
>
>
>>> + ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac);
>> What? I think this function is only able to load CALDATA for ath9k
>> devices.Maybe I'm wrong:)
>
> The router has two radios, one ath9k and one ath10k. Isn't it needed for the
> ath9k calibration data? Or this radio is already covered by
> "ath79_register_wmac(art + MAC1200R_WMAC_CALDATA_OFFSET, tmpmac); ...?
>
>
>>> +$(eval $(call
>>> SingleProfile,TPLINK-LZMA,64kraw,MAC1200R,mc-mac1200r,MC-MAC1200R,ttyS0,115200,0x12000001,1,8Mlzma))
>>The factory image is broken since TP-LINK started to use a new firmware
>>format with RSA signature in China.This should be introduced in the TOH wiki
>>I think:)
>
> Done!
>
>
>
> @John:
>
> Sorry. Do you mean a description for the patch? I am not aware of what SoB
> means.
Yes, a patch description followed by your Signed-off-by (SoB) is missing. Have
a look at the submitting patches wiki page for the patch format requirements.
Also, check through your patch again and make sure to mind alphabetic order
wherever needed.
>
>
> Thanks!
>
> Roger
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
