[OpenWrt-Devel] [PATCH] kirkwood: define ethernet aliases in the device tree

[Nathan Hintz]

The aliases are needed for u-boot to update the ethernet mac addresses
using the values from the u-boot environment.

Signed-off-by: Nathan Hintz <nlhi...@hotmail.com>
---
 .../patches-3.14/180-kirkwood-ethernetn.patch      | 33 ++++++++++++++++++++++
 .../patches-3.18/180-kirkwood-ethernetn.patch      | 17 +++++++++++
 2 files changed, 50 insertions(+)
 create mode 100644 
target/linux/kirkwood/patches-3.14/180-kirkwood-ethernetn.patch
 create mode 100644 
target/linux/kirkwood/patches-3.18/180-kirkwood-ethernetn.patch

diff --git a/target/linux/kirkwood/patches-3.14/180-kirkwood-ethernetn.patch 
b/target/linux/kirkwood/patches-3.14/180-kirkwood-ethernetn.patch
new file mode 100644
index 0000000..137fc98
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.14/180-kirkwood-ethernetn.patch
@@ -0,0 +1,33 @@
+--- a/arch/arm/boot/dts/kirkwood.dtsi
++++ b/arch/arm/boot/dts/kirkwood.dtsi
+@@ -22,8 +22,10 @@
+       };
+ 
+       aliases {
+-             gpio0 = &gpio0;
+-             gpio1 = &gpio1;
++              gpio0 = &gpio0;
++              gpio1 = &gpio1;
++              ethernet0 = &eth0port;
++              ethernet1 = &eth1port;
+       };
+ 
+       mbus {
+@@ -242,7 +244,7 @@
+                       marvell,tx-checksum-limit = <1600>;
+                       status = "disabled";
+ 
+-                      ethernet0-port@0 {
++                      eth0port: ethernet0-port@0 {
+                               compatible = "marvell,kirkwood-eth-port";
+                               reg = <0>;
+                               interrupts = <11>;
+@@ -273,7 +275,7 @@
+                       marvell,tx-checksum-limit = <1600>;
+                       status = "disabled";
+ 
+-                      ethernet1-port@0 {
++                      eth1port: ethernet1-port@0 {
+                               compatible = "marvell,kirkwood-eth-port";
+                               reg = <0>;
+                               interrupts = <15>;
diff --git a/target/linux/kirkwood/patches-3.18/180-kirkwood-ethernetn.patch 
b/target/linux/kirkwood/patches-3.18/180-kirkwood-ethernetn.patch
new file mode 100644
index 0000000..93608c4
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.18/180-kirkwood-ethernetn.patch
@@ -0,0 +1,17 @@
+--- a/arch/arm/boot/dts/kirkwood.dtsi
++++ b/arch/arm/boot/dts/kirkwood.dtsi
+@@ -22,9 +22,11 @@
+       };
+ 
+       aliases {
+-             gpio0 = &gpio0;
+-             gpio1 = &gpio1;
+-             i2c0 = &i2c0;
++              gpio0 = &gpio0;
++              gpio1 = &gpio1;
++              i2c0 = &i2c0;
++              ethernet0 = &eth0port;
++              ethernet1 = &eth1port;
+       };
+ 
+       mbus {
-- 
1.9.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel