On 12/01/2015 20:16, Heiner Kallweit wrote: > Patches 1-3 are improvements w/o functional change.
merged 1-3 4-6 will need a bit more time and a closer look > > Patches 4 allows to control EEE PHY sleep mode per port via swconfig. > Motivation is that as workaround for issues with certain link partners > EEE was disabled in general. > Still the default is to initially disable EEE on all ports, however the > brave now have the option to enable EEE on selected ports. > > Patch 5 displays autonegotiated EEE capabilities as part of the get_link > attribute. Note that enabling/disabling PHY EEE sleep mode is independent > of autonegotiated EEE capabilities. Even if PHY EEE sleep mode is disabled > the switch advertises EEE capabilities to the link partner. > This might still allow the link partner to sleep if network is inactive. > > Patch 6 displays autonegotiated rx/tx flow control as part of the get_link > attribute. So far this was the case in forced mode only. > > Heiner Kallweit (6): > ar8216: define all switch_addr structs as const > ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate > ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set > ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per > port > ar8216: add 802.3az EEE info to swconfig get_link attribute > ar8216: display flow control info in swconfig get_link in case of > autonegatiation too > > .../linux/generic/files/drivers/net/phy/ar8216.c | 60 ++++--- > .../linux/generic/files/drivers/net/phy/ar8216.h | 18 +++ > .../linux/generic/files/drivers/net/phy/ar8327.c | 175 > ++++++++++++++++++--- > .../linux/generic/files/drivers/net/phy/ar8327.h | 5 + > .../linux/generic/files/drivers/net/phy/swconfig.c | 4 +- > target/linux/generic/files/include/linux/switch.h | 2 + > 6 files changed, 216 insertions(+), 48 deletions(-) > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
