The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.
Signed-off-by: Bastian Bittorf <bitt...@bluebottle.com>
---
.../au1000/base-files/etc/uci-defaults/02_network | 17 ++++++
target/linux/au1000/base-files/lib/au1000.sh | 59 ++++++++++++++++++++
2 files changed, 76 insertions(+)
create mode 100755 target/linux/au1000/base-files/etc/uci-defaults/02_network
create mode 100644 target/linux/au1000/base-files/lib/au1000.sh
diff --git a/target/linux/au1000/base-files/etc/uci-defaults/02_network
b/target/linux/au1000/base-files/etc/uci-defaults/02_network
new file mode 100755
index 0000000..80bfb73
--- /dev/null
+++ b/target/linux/au1000/base-files/etc/uci-defaults/02_network
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/au1000.sh
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+MAC=
+
+case "$(au1000_board_name)" in
+ 'internetbox')
+ MAC="$( au1000_yamonenv_getvar 'ethaddr' )"
+ MAC="$( macaddr_canonicalize "$MAC" )"
+
+ [ -n "$MAC ] && ucidef_set_interface_macaddr lan "$MAC"
+ ;;
+esac
+
+[ -z "$MAC" ] || uci commit network
diff --git a/target/linux/au1000/base-files/lib/au1000.sh
b/target/linux/au1000/base-files/lib/au1000.sh
new file mode 100644
index 0000000..556598d
--- /dev/null
+++ b/target/linux/au1000/base-files/lib/au1000.sh
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+au1000_yamonenv_getvar()
+{
+ local varname="$1"
+ local partition
+
+ . /lib/functions.sh
+
+ partition="$( find_mtd_part 'yamon env' )"
+ YAMONENVFILE="$partition" yamonenv "$varname"
+}
+
+au1000_detect()
+{
+ local line board_name model
+
+ while read line; do
+ case "$line" in
+ 'system type'*)
+ break
+ ;;
+ esac
+ done <'/proc/cpuinfo'
+
+ case "$line" in
+ *' MTX-1')
+ # both models appear nearly similar: the 'InternetBox'
has
+ # the same design but shrinked to 1 PCB and only 1 x
miniPCI
+ # for WiFi/ath5k and 1 x miniPCI for CardBus/UMTS, they
differ
+ # in BogoMIPS but there are old MeshCubes with 330 Mhz
instead
+ # of 400 MHz and no Cube has 'imei' (for UMTS) set in
bootloader-env
+
+ if [ -n "$( au1000_yamonenv_getvar 'imei' )" ]; then
+ board_name='internetbox'
+ model='T-Mobile InternetBox TMD SB1-S'
+ else
+ board_name='meshcube'
+ model='4G Systems AccessCube/MeshCube'
+ fi
+ ;;
+ *)
+ board_name='unknown'
+ model='unknown'
+ ;;
+ esac
+
+ mkdir -p '/tmp/sysinfo'
+ echo "$board_name" >'/tmp/sysinfo/board_name'
+ echo "$model" >'/tmp/sysinfo/model'
+}
+
+au1000_board_name()
+{
+ local file='/tmp/sysinfo/board_name'
+
+ [ -e "$file" ] || au1000_detect
+ cat "$file"
+}
--
1.7.10.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
