On 17 November 2014 at 18:42, Sebastian Moeller <moell...@gmx.de> wrote: > Hi Richard, hi Jaime > After changing the pop values have a look at the output of “ps w” on > the router, when I tried to p;ay with these from the luci GUI I noticed that > pppd was called with lcp-echo-failure 5 while the GUI reported 0 (meaning > unlimited), so something might be off in parsing/passing the arguments from > the GUI. (Then again with my testing I nave managed to get pop session > timeout even though packet captures indicated that under load some lcl echo > requests went missing…) > Best Regards > Sebastian
Problem fixed! After hours of trying to diagnose what was going wrong, I took a long shot and tried overwriting the openwrt-distributed adsl firmware blob (/lib/firmware/ltq-dsl-fw-a-danube.bin) with the firmware blob that was originally distributed by BT (the original supplier of the Home Hub). Hey presto! My dsl connection has been perfect ever since (even though my dsl supplier is _not_ BT!) The whole saga is documented here (in case anyone else has the same problem and wants to try this solution): http://openwrt.ebilan.co.uk/viewtopic.php?f=4&t=68 Many thanks to all who tried to help. With kind regards, Jaime _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
