Hi, do I understand it correctly. For CC is 3.14 planed? Thanks, Claudio -- Reviewing OpenWrt BB for Xmodus Systems XM1710E GSM/UMTS Router <http://www.xmodus-systems.de/en/terminals/routers.html>
On 05.12.2014 09:07, John Crispin wrote: > i intentionally don't set a date. i have done so in the past and got > ranted at for not being on time. this happened with AA and BB so CC is > illusive and will be ready when ready. all i will say is that i am > already working on it, but you noticed that yourself :) > > > On 05/12/2014 02:20, Karl P wrote: >> That's the second[2] email I've seen that hints at some sort of >> formal date being known for CC, or some plan, or some detail. >> >> It would be appreciated if this magical special knowledge was >> shared a little wider. I haven't seen _any_ emails or irc >> conversations about _any_ dates or guidelines for any upcoming >> release. I can't see any release branches. I don't know where >> else I should be looking. >> >> Is there some release guidelines that I should know about? Have >> there been decisions taken by anyone? I'm not asking to be >> involved in the decision making process, but I would very much like >> to know when decisions have been made. >> >> Sincerely, Karl P >> >> >> >> [2]http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg27746.html >> >> >> >> >> On 12/04/2014 10:53 PM, John Crispin wrote: >>> great, oxnas will now be part of CC :) >>> >>> On 04/12/2014 23:51, Daniel Golle wrote: >>>> This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 >>>> on https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git which >>>> removed patches and config for 3.14. >>>> >>>> [arm_introduce-dma-fiq-irq-broadcast patch was renamed to >>>> match 3.18] >>>> >>>> Signed-off-by: Daniel Golle <dan...@makrotopia.org> --- >>>> target/linux/oxnas/config-3.14 | 349 >>>> +++++++++++++++++++++ >>>> .../010-arm_introduce-dma-fiq-irq-broadcast.patch | 62 ++++ >>>> ...-obtain-reset-controller-from-device-tree.patch | 99 >>>> ++++++ .../250-add-plxtech-vendor-prefix.patch | 12 >>>> + .../300-introduce-oxnas-platform.patch | 79 >>>> +++++ .../oxnas/patches-3.14/310-oxnas-clocksource.patch | 24 >>>> ++ .../oxnas/patches-3.14/320-oxnas-irqchip.patch | 40 >>>> +++ .../oxnas/patches-3.14/330-oxnas-pinctrl.patch | 32 >>>> ++ .../linux/oxnas/patches-3.14/340-oxnas-pcie.patch | 23 ++ >>>> .../linux/oxnas/patches-3.14/350-oxnas-reset.patch | 20 ++ >>>> .../linux/oxnas/patches-3.14/400-oxnas-nand.patch | 28 ++ >>>> .../linux/oxnas/patches-3.14/500-oxnas-sata.patch | 30 ++ >>>> .../linux/oxnas/patches-3.14/800-oxnas-ehci.patch | 30 ++ >>>> .../linux/oxnas/patches-3.14/900-more-boards.patch | 16 + 14 >>>> files changed, 844 insertions(+) create mode 100644 >>>> target/linux/oxnas/config-3.14 create mode 100644 >>>> target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>> >>>> >>>> > create mode 100644 >>> target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>> > create mode 100644 >>>> target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>> >>>> > create mode 100644 >>> target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch > create mode 100644 >>>> target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>> create mode 100644 >>>> target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/350-oxnas-reset.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/400-oxnas-nand.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/500-oxnas-sata.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch create >>>> mode 100644 >>>> target/linux/oxnas/patches-3.14/900-more-boards.patch >>>> >>>> diff --git a/target/linux/oxnas/config-3.14 >>>> b/target/linux/oxnas/config-3.14 new file mode 100644 index >>>> 0000000..727d81e --- /dev/null +++ >>>> b/target/linux/oxnas/config-3.14 @@ -0,0 +1,349 @@ >>>> +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM_EMULATION is not set >>>> +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y >>>> +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y >>>> +CONFIG_ARCH_HAS_RESET_CONTROLLER=y >>>> +CONFIG_ARCH_HAS_TICK_BROADCAST=y >>>> +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y >>>> +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# >>>> CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set >>>> +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OXNAS=y >>>> +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# >>>> CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# >>>> CONFIG_ARCH_SPARSEMEM_DEFAULT is not set >>>> +CONFIG_ARCH_SUSPEND_POSSIBLE=y >>>> +CONFIG_ARCH_USE_BUILTIN_BSWAP=y >>>> +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y >>>> +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y >>>> +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +# >>>> CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_GIC=y >>>> +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_NR_BANKS=8 >>>> +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y >>>> +CONFIG_ARM_UNWIND=y +CONFIG_ATA=y +CONFIG_AUTO_ZRELADDR=y +# >>>> CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_SD=y >>>> +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y >>>> +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1 >>>> +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y >>>> +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +# CONFIG_CACHE_L2X0 >>>> is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y >>>> +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_RPS_TIMER=y >>>> +CONFIG_CLONE_BACKWARDS=y >>>> +CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial" >>>> +CONFIG_COMMON_CLK=y +CONFIG_COMPACTION=y >>>> +CONFIG_CONSOLE_POLL=y +CONFIG_COREDUMP=y +CONFIG_CPU_32v6=y >>>> +CONFIG_CPU_32v6K=y +CONFIG_CPU_ABRT_EV6=y +# >>>> CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V6=y >>>> +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y >>>> +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y >>>> +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set >>>> +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y >>>> +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_PABRT_V6=y >>>> +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V6=y >>>> +CONFIG_CPU_V6K=y +CONFIG_CRC16=y +CONFIG_CRYPTO_CRC32C=y >>>> +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH=y >>>> +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y >>>> +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_LL=y >>>> +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# >>>> CONFIG_DEBUG_LL_UART_8250 is not set >>>> +CONFIG_DEBUG_LL_UART_NONE=y +# CONFIG_DEBUG_LL_UART_PL01X is >>>> not set +# CONFIG_DEBUG_UART_8250 is not set +# >>>> CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_USER is not >>>> set +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=8 >>>> +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DIRECT_IO=y >>>> +CONFIG_DMADEVICES=y +CONFIG_DMA_CACHE_FIQ_BROADCAST=y +# >>>> CONFIG_DMA_CACHE_RWFO is not set +CONFIG_DMA_OF=y >>>> +CONFIG_DNOTIFY=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is not >>>> set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_EARLY_PRINTK=y >>>> +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y >>>> +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FIQ=y +CONFIG_FS_MBCACHE=y >>>> +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_BUG=y >>>> +CONFIG_GENERIC_CLOCKEVENTS=y >>>> +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y >>>> +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y >>>> +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y >>>> +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y >>>> +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PINCONF=y >>>> +CONFIG_GENERIC_SCHED_CLOCK=y >>>> +CONFIG_GENERIC_SMP_IDLE_THREAD=y >>>> +CONFIG_GENERIC_STRNCPY_FROM_USER=y >>>> +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y >>>> +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y >>>> +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_SYSFS=y >>>> +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y >>>> +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# >>>> CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set >>>> +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y >>>> +CONFIG_HAVE_ARCH_PFN_VALID=y >>>> +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y >>>> +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y >>>> +CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not >>>> set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y >>>> +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y >>>> +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y >>>> +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y >>>> +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y >>>> +CONFIG_HAVE_DYNAMIC_FTRACE=y >>>> +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y >>>> +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y >>>> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y >>>> +CONFIG_HAVE_FUNCTION_TRACER=y >>>> +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y >>>> +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y >>>> +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y >>>> +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y >>>> +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y >>>> +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y >>>> +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y >>>> +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y >>>> +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y >>>> +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y >>>> +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HOTPLUG_CPU=y >>>> +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y >>>> +CONFIG_I2C_BOARDINFO=y +CONFIG_ICPLUS_PHY=y >>>> +CONFIG_INET_DIAG=y +CONFIG_INET_LRO=y +CONFIG_INET_TCP_DIAG=y >>>> +CONFIG_INET_UDP_DIAG=y +CONFIG_INPUT=y +# CONFIG_INPUT_MISC is >>>> not set +CONFIG_IOMMU_HELPER=y +CONFIG_IOMMU_SUPPORT=y +# >>>> CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_MULTICAST is >>>> not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_BOOTP is not set >>>> +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_RARP is not set >>>> +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y >>>> +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_TIME_ACCOUNTING=y >>>> +CONFIG_IRQ_WORK=y +# CONFIG_ISDN is not set +CONFIG_JBD2=y +# >>>> CONFIG_JFFS2_FS is not set +CONFIG_JUMP_LABEL=y >>>> +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KGDB=y +# >>>> CONFIG_KGDB_KDB is not set +CONFIG_KGDB_SERIAL_CONSOLE=y +# >>>> CONFIG_KGDB_TESTS is not set +CONFIG_KTIME_SCALAR=y +# >>>> CONFIG_LDM_DEBUG is not set +CONFIG_LDM_PARTITION=y +# >>>> CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is >>>> not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# >>>> CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LOCKUP_DETECTOR=y >>>> +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y >>>> +CONFIG_MACH_OX820=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAILBOX=y >>>> +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIGHT_HAVE_PCI=y >>>> +CONFIG_MIGRATION=y +# CONFIG_MLX5_CORE is not set >>>> +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MODULE_STRIPPED is not >>>> set +# CONFIG_MTD_CFI is not set +# >>>> CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y >>>> +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_OXNAS=y >>>> +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_SM_COMMON is not set >>>> +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UBI=y >>>> +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# >>>> CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is >>>> not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 >>>> +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_MULTI_IRQ_HANDLER=y >>>> +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y >>>> +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y >>>> +CONFIG_NLS=y +CONFIG_NLS_UTF8=y +CONFIG_NO_BOOTMEM=y >>>> +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=2 >>>> +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y >>>> +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IOMMU=y >>>> +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y >>>> +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y >>>> +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y >>>> +CONFIG_PACKET_DIAG=y +CONFIG_PAGEFLAGS_EXTENDED=y >>>> +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y >>>> +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set >>>> +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_PERFORMANCE is >>>> not set +# CONFIG_PCIEASPM_POWERSAVE is not set >>>> +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_PME=y +CONFIG_PCI_OXNAS=y >>>> +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y >>>> +CONFIG_PINCTRL_OXNAS=y +CONFIG_PLXTECH_RPS=y +CONFIG_PM=y >>>> +CONFIG_PM_CLK=y +# CONFIG_PM_DEBUG is not set >>>> +CONFIG_PM_RUNTIME=y +CONFIG_PPS=y +# CONFIG_PREEMPT_RCU is not >>>> set +CONFIG_PRINTK_TIME=y +CONFIG_PROC_DEVICETREE=y >>>> +CONFIG_PTP_1588_CLOCK=y +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y >>>> +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_STALL_COMMON=y >>>> +CONFIG_REALTEK_PHY=y +CONFIG_RELAY=y >>>> +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER_OXNAS=y >>>> +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# >>>> CONFIG_RTC_DRV_CMOS is not set +CONFIG_SATA_OXNAS=y >>>> +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y >>>> +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_PCI=y >>>> +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SERIAL_KGDB_NMI >>>> is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SMP=y >>>> +CONFIG_SMP_ON_UP=y +CONFIG_SOCK_DIAG=y +CONFIG_STMMAC_DA=y >>>> +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_ETH=y +# >>>> CONFIG_STMMAC_PCI is not set +CONFIG_STMMAC_PLATFORM=y >>>> +CONFIG_STOP_MACHINE=y +# CONFIG_STRIP_ASM_SYMS is not set >>>> +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y >>>> +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +# >>>> CONFIG_UBIFS_FS_ADVANCED_COMPR is not set >>>> +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y >>>> +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y >>>> +CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" +CONFIG_USB=y >>>> +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set >>>> +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set >>>> +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 >>>> +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_VFP is not set >>>> +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WATCHDOG_CORE=y >>>> +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_XPS=y >>>> +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_BCJ=y >>>> +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +# CONFIG_ZBUD >>>> is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y >>>> +CONFIG_ZONE_DMA_FLAG=0 diff --git >>>> a/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>> >>>> >>>> > b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>> >>>> >>> new file mode 100644 >>>> index 0000000..ed01fe1 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch >>>> >>>> >>>> > @@ -0,0 +1,62 @@ >>>> +Index: linux-3.14.18/arch/arm/include/asm/glue-cache.h >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/include/asm/glue-cache.h >>>> ++++ linux-3.14.18/arch/arm/include/asm/glue-cache.h +@@ >>>> -156,11 +156,19 @@ extern inline void nop_dma_unmap_area(co + >>>> #define __cpuc_flush_user_range >>>> __glue(_CACHE,_flush_user_cache_range) + #define >>>> __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) >>>> + #define __cpuc_coherent_user_range >>>> __glue(_CACHE,_coherent_user_range) ++#ifndef >>>> CONFIG_DMA_CACHE_FIQ_BROADCAST + #define >>>> __cpuc_flush_dcache_area >>>> __glue(_CACHE,_flush_kern_dcache_area) + + #define >>>> dmac_map_area __glue(_CACHE,_dma_map_area) + >>>> #define dmac_unmap_area >>>> __glue(_CACHE,_dma_unmap_area) + #define dmac_flush_range >>>> __glue(_CACHE,_dma_flush_range) ++#else ++#define >>>> __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) >>>> ++ ++#define dmac_map_area __glue(fiq,_dma_map_area) >>>> ++#define dmac_unmap_area >>>> __glue(fiq,_dma_unmap_area) ++#define dmac_flush_range >>>> __glue(fiq,_dma_flush_range) ++#endif /* >>>> CONFIG_DMA_CACHE_FIQ_BROADCAST */ + #endif + + #endif +Index: >>>> linux-3.14.18/arch/arm/mm/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/mm/Kconfig >>>> ++++ linux-3.14.18/arch/arm/mm/Kconfig +@@ -843,6 +843,17 @@ >>>> config DMA_CACHE_RWFO + in hardware, other workarounds >>>> are needed (e.g. cache + maintenance broadcasting in >>>> software via FIQ). + ++config DMA_CACHE_FIQ_BROADCAST ++ >>>> bool "Enable fiq broadcast DMA cache maintenance" ++ depends >>>> on CPU_V6K && SMP ++ select FIQ ++ help ++ The Snoop >>>> Control Unit on ARM11MPCore does not detect the ++ cache >>>> maintenance operations and the dma_{map,unmap}_area() ++ >>>> functions may leave stale cache entries on other CPUs. By ++ >>>> enabling this option, fiq broadcast in the ARMv6 ++ DMA >>>> cache maintenance functions is performed. ++ + config >>>> OUTER_CACHE + bool + +Index: >>>> linux-3.14.18/arch/arm/mm/flush.c >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/mm/flush.c >>>> ++++ linux-3.14.18/arch/arm/mm/flush.c +@@ -291,7 +291,11 @@ >>>> void flush_dcache_page(struct page *page + + mapping = >>>> page_mapping(page); + ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST >>>> + if (!cache_ops_need_broadcast() && ++#else ++ if ( >>>> ++#endif + mapping && !page_mapped(page)) + >>>> clear_bit(PG_dcache_clean, &page->flags); + else { diff >>>> --git >>>> a/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>> >>>> >>>> > b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>> >>>> >>> new file mode 100644 >>>> index 0000000..3b3947c --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/100-obtain-reset-controller-from-device-tree.patch >>>> >>>> >>>> > @@ -0,0 +1,99 @@ >>>> +Index: linux-3.13.7/drivers/reset/core.c >>>> +=================================================================== >>>> >>>> > +--- linux-3.13.7.orig/drivers/reset/core.c >>>> ++++ linux-3.13.7/drivers/reset/core.c +@@ -127,15 +127,16 @@ >>>> int reset_control_deassert(struct reset_ + >>>> EXPORT_SYMBOL_GPL(reset_control_deassert); + + /** +- * >>>> reset_control_get - Lookup and obtain a reference to a reset >>>> controller. +- * @dev: device to be reset by the controller ++ >>>> * of_reset_control_get - Lookup and obtain a reference to a >>>> reset controller. ++ * @node: device to be reset by the >>>> controller + * @id: reset line name + * + * Returns a struct >>>> reset_control or IS_ERR() condition containing errno. + * + * >>>> Use of id names is optional. + */ +-struct reset_control >>>> *reset_control_get(struct device *dev, const char *id) ++struct >>>> reset_control *of_reset_control_get(struct device_node *node, >>>> ++ const char *id) + { + struct >>>> reset_control *rstc = ERR_PTR(-EPROBE_DEFER); + struct >>>> reset_controller_dev *r, *rcdev; +@@ -144,13 +145,10 @@ struct >>>> reset_control *reset_control_get( + int rstc_id; + int ret; >>>> + +- if (!dev) +- return ERR_PTR(-EINVAL); +- + >>>> if (id) +- index = >>>> of_property_match_string(dev->of_node, ++ index = >>>> of_property_match_string(node, + "reset-names", id); +- ret >>>> = of_parse_phandle_with_args(dev->of_node, "resets", >>>> "#reset-cells", ++ ret = of_parse_phandle_with_args(node, >>>> "resets", "#reset-cells", + index, &args); >>>> + if (ret) + return ERR_PTR(ret); +@@ -185,12 >>>> +183,35 @@ struct reset_control *reset_control_get( + >>>> return ERR_PTR(-ENOMEM); + } + +- rstc->dev = dev; + >>>> rstc->rcdev = rcdev; + rstc->id = rstc_id; + + return rstc; >>>> + } ++EXPORT_SYMBOL_GPL(of_reset_control_get); ++ ++/** ++ * >>>> reset_control_get - Lookup and obtain a reference to a reset >>>> controller. ++ * @dev: device to be reset by the controller ++ >>>> * @id: reset line name ++ * ++ * Returns a struct >>>> reset_control or IS_ERR() condition containing errno. ++ * ++ * >>>> Use of id names is optional. ++ */ ++struct reset_control >>>> *reset_control_get(struct device *dev, const char *id) ++{ ++ >>>> struct reset_control *rstc; ++ ++ if (!dev) ++ return >>>> ERR_PTR(-EINVAL); ++ ++ rstc = >>>> of_reset_control_get(dev->of_node, id); ++ if >>>> (!IS_ERR(rstc)) ++ rstc->dev = dev; ++ ++ return rstc; ++} >>>> + EXPORT_SYMBOL_GPL(reset_control_get); + + /** +Index: >>>> linux-3.13.7/include/linux/reset.h >>>> +=================================================================== >>>> >>>> > +--- linux-3.13.7.orig/include/linux/reset.h >>>> ++++ linux-3.13.7/include/linux/reset.h +@@ -1,6 +1,8 @@ + >>>> #ifndef _LINUX_RESET_H_ + #define _LINUX_RESET_H_ + ++#include >>>> <linux/of.h> ++ + struct device; + struct reset_control; + +@@ >>>> -8,6 +10,8 @@ int reset_control_reset(struct reset_con + int >>>> reset_control_assert(struct reset_control *rstc); + int >>>> reset_control_deassert(struct reset_control *rstc); + ++struct >>>> reset_control *of_reset_control_get(struct device_node *node, >>>> ++ const char *id); + struct reset_control >>>> *reset_control_get(struct device *dev, const char *id); + void >>>> reset_control_put(struct reset_control *rstc); + struct >>>> reset_control *devm_reset_control_get(struct device *dev, const >>>> char *id); diff --git >>>> a/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>> >>>> > b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>> >>> new file mode 100644 >>>> index 0000000..c08754d --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/250-add-plxtech-vendor-prefix.patch >>>> >>>> > @@ -0,0 +1,12 @@ >>>> +Index: >>>> linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt >>>> >>>> > +=================================================================== >>>> +--- >>>> linux-3.14.18.orig/Documentation/devicetree/bindings/vendor-prefixes.txt >>>> >>>> > ++++ linux-3.14.18/Documentation/devicetree/bindings/vendor-prefixes.txt >>>> +@@ -65,6 +65,7 @@ onnn ON Semiconductor Corp. + panasonic >>>> Panasonic Corporation + phytec PHYTEC Messtechnik GmbH + >>>> picochip Picochip Ltd ++plxtech PLX Technology, Inc. + >>>> powervr PowerVR (deprecated, use img) + qca Qualcomm >>>> Atheros, Inc. + qcom Qualcomm Technologies, Inc diff --git >>>> a/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>> >>>> > b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>> >>> new file mode 100644 >>>> index 0000000..b6e2efb --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/300-introduce-oxnas-platform.patch >>>> >>>> > @@ -0,0 +1,79 @@ >>>> +Index: linux-3.14.18/arch/arm/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/Kconfig >>>> ++++ linux-3.14.18/arch/arm/Kconfig +@@ -367,6 +367,17 @@ >>>> config ARCH_VERSATILE + help + This enables support >>>> for ARM Ltd Versatile board. + ++config ARCH_OXNAS ++ bool >>>> "Oxford Semiconductor 815/820/825 NAS SoC" ++ select >>>> ARCH_REQUIRE_GPIOLIB ++ select CLKDEV_LOOKUP ++ select >>>> GENERIC_CLOCKEVENTS ++ select COMMON_CLK ++ select >>>> MIGHT_HAVE_PCI ++ select ARCH_HAS_RESET_CONTROLLER ++ >>>> help ++ This enables support for Oxsemi 815/820/825 NAS >>>> SoC ++ + config ARCH_AT91 + bool "Atmel AT91" + select >>>> ARCH_REQUIRE_GPIOLIB +@@ -999,6 +1010,8 @@ source >>>> "arch/arm/mach-omap2/Kconfig" + + source >>>> "arch/arm/mach-orion5x/Kconfig" + ++source >>>> "arch/arm/mach-oxnas/Kconfig" ++ + source >>>> "arch/arm/mach-picoxcell/Kconfig" + + source >>>> "arch/arm/mach-pxa/Kconfig" +Index: >>>> linux-3.14.18/arch/arm/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/Makefile >>>> ++++ linux-3.14.18/arch/arm/Makefile +@@ -183,6 +183,7 @@ >>>> machine-$(CONFIG_ARCH_NSPIRE) += nspire + >>>> machine-$(CONFIG_ARCH_OMAP1) += omap1 + >>>> machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 + >>>> machine-$(CONFIG_ARCH_ORION5X) += orion5x >>>> ++machine-$(CONFIG_ARCH_OXNAS) += oxnas + >>>> machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell + >>>> machine-$(CONFIG_ARCH_PXA) += pxa + >>>> machine-$(CONFIG_ARCH_REALVIEW) += realview +Index: >>>> linux-3.14.18/arch/arm/boot/dts/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile >>>> ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,6 +233,7 >>>> @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + >>>> am43x-epos-evm.dtb \ + dra7-evm.dtb + >>>> dtb-$(CONFIG_ARCH_ORION5X) += >>>> orion5x-lacie-ethernet-disk-mini-v2.dtb >>>> ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb + >>>> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + >>>> dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + >>>> ste-hrefprev60-stuib.dtb \ +Index: >>>> linux-3.14.18/arch/arm/tools/mach-types >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/tools/mach-types >>>> ++++ linux-3.14.18/arch/arm/tools/mach-types +@@ -228,6 +228,7 >>>> @@ edb9302a MACH_EDB9302A EDB9302A 1127 + >>>> edb9307a MACH_EDB9307A EDB9307A 1128 + >>>> omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 + vstms >>>> MACH_VSTMS VSTMS 1140 ++ox820 >>>> MACH_OX820 OX820 1152 + micro9m MACH_MICRO9M >>>> MICRO9M 1169 + bug MACH_BUG BUG >>>> 1179 + at91sam9263ek MACH_AT91SAM9263EK AT91SAM9263EK >>>> 1202 +Index: linux-3.14.18/drivers/clk/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/clk/Makefile >>>> ++++ linux-3.14.18/drivers/clk/Makefile +@@ -19,6 +19,7 @@ >>>> obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1 + >>>> obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + >>>> obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o + >>>> obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o >>>> ++obj-$(CONFIG_ARCH_OXNAS) += clk-oxnas.o + >>>> obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o + >>>> obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o + >>>> obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o diff >>>> --git >>>> a/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>> b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>> new file mode 100644 index 0000000..1eb74de --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/310-oxnas-clocksource.patch >>>> @@ -0,0 +1,24 @@ +Index: >>>> linux-3.14.18/drivers/clocksource/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/clocksource/Kconfig >>>> ++++ linux-3.14.18/drivers/clocksource/Kconfig +@@ -140,3 >>>> +140,9 @@ config VF_PIT_TIMER + bool + help + >>>> Support for Period Interrupt Timer on Freescale Vybrid Family >>>> SoCs. ++ ++config CLKSRC_RPS_TIMER ++ def_bool y if >>>> ARCH_OXNAS ++ select CLKSRC_MMIO ++ help ++ This >>>> option enables support for the oxnas rps timers. +Index: >>>> linux-3.14.18/drivers/clocksource/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/clocksource/Makefile >>>> ++++ linux-3.14.18/drivers/clocksource/Makefile +@@ -37,3 +37,5 >>>> @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arc + >>>> obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o + >>>> obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o + >>>> obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o ++ >>>> ++obj-$(CONFIG_CLKSRC_RPS_TIMER) += oxnas_rps_timer.o >>>> diff --git >>>> a/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch >>>> b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch new >>>> file mode 100644 index 0000000..6406a3f --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/320-oxnas-irqchip.patch @@ >>>> -0,0 +1,40 @@ +Index: linux-3.14.18/drivers/irqchip/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/irqchip/Kconfig >>>> ++++ linux-3.14.18/drivers/irqchip/Kconfig +@@ -10,6 +10,11 @@ >>>> config ARM_GIC + config GIC_NON_BANKED + bool + ++config >>>> PLXTECH_RPS ++ def_bool y if ARHC_OXNAS ++ depends on >>>> ARCH_OXNAS ++ select IRQ_DOMAIN ++ + config ARM_NVIC + bool >>>> + select IRQ_DOMAIN +Index: >>>> linux-3.14.18/drivers/irqchip/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/irqchip/Makefile >>>> ++++ linux-3.14.18/drivers/irqchip/Makefile +@@ -20,6 +20,7 @@ >>>> obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc. + >>>> obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o + >>>> obj-$(CONFIG_RENESAS_INTC_IRQPIN) += >>>> irq-renesas-intc-irqpin.o + obj-$(CONFIG_RENESAS_IRQC) >>>> += irq-renesas-irqc.o ++obj-$(CONFIG_PLXTECH_RPS) += >>>> irq-rps.o + obj-$(CONFIG_VERSATILE_FPGA_IRQ) += >>>> irq-versatile-fpga.o + obj-$(CONFIG_ARCH_NSPIRE) += >>>> irq-zevio.o + obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o >>>> +Index: linux-3.14.18/drivers/irqchip/irq-gic.c >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/irqchip/irq-gic.c >>>> ++++ linux-3.14.18/drivers/irqchip/irq-gic.c +@@ -1015,6 >>>> +1015,7 @@ IRQCHIP_DECLARE(gic_400, "arm,gic-400", + >>>> IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", >>>> gic_of_init); + IRQCHIP_DECLARE(cortex_a9_gic, >>>> "arm,cortex-a9-gic", gic_of_init); + >>>> IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", >>>> gic_of_init); ++IRQCHIP_DECLARE(arm11_mpcore_gic, >>>> "arm,arm11mp-gic", gic_of_init); + >>>> IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", >>>> gic_of_init); + IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", >>>> gic_of_init); + diff --git >>>> a/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch >>>> b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch new >>>> file mode 100644 index 0000000..60caca3 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/330-oxnas-pinctrl.patch @@ >>>> -0,0 +1,32 @@ +Index: linux-3.14.18/drivers/pinctrl/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/pinctrl/Kconfig >>>> ++++ linux-3.14.18/drivers/pinctrl/Kconfig +@@ -87,6 +87,15 @@ >>>> config PINCTRL_AT91 + help + Say Y here to enable the >>>> at91 pinctrl driver + ++config PINCTRL_OXNAS ++ bool "OXNAS >>>> pinctrl driver" ++ depends on OF ++ depends on ARCH_OXNAS >>>> ++ select PINMUX ++ select PINCONF ++ help ++ Say >>>> Y here to enable the oxnas pinctrl driver ++ + config >>>> PINCTRL_BAYTRAIL + bool "Intel Baytrail GPIO pin control" + >>>> depends on GPIOLIB && ACPI && X86 +Index: >>>> linux-3.14.18/drivers/pinctrl/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/pinctrl/Makefile >>>> ++++ linux-3.14.18/drivers/pinctrl/Makefile +@@ -67,6 +67,7 @@ >>>> obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl- + >>>> obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o + >>>> obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o + >>>> obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o >>>> ++obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o + + >>>> obj-$(CONFIG_PLAT_ORION) += mvebu/ + >>>> obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ diff --git >>>> a/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch >>>> b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch new >>>> file mode 100644 index 0000000..ca0ccb8 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/340-oxnas-pcie.patch @@ -0,0 >>>> +1,23 @@ +Index: linux-3.14.18/drivers/pci/host/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/pci/host/Kconfig >>>> ++++ linux-3.14.18/drivers/pci/host/Kconfig +@@ -33,4 +33,9 @@ >>>> config PCI_RCAR_GEN2 + There are 3 internal PCI >>>> controllers available with a single + built-in EHCI/OHCI >>>> host controller present on each one. + ++config PCI_OXNAS ++ >>>> bool "PLX Oxnas PCIe controller" ++ depends on ARCH_OXNAS ++ >>>> select PCIEPORTBUS ++ + endmenu +Index: >>>> linux-3.14.18/drivers/pci/host/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/pci/host/Makefile >>>> ++++ linux-3.14.18/drivers/pci/host/Makefile +@@ -4,3 +4,4 @@ >>>> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o + obj-$(CONFIG_PCI_MVEBU) >>>> += pci-mvebu.o + obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o + >>>> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o >>>> ++obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o diff --git >>>> a/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch >>>> b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch new >>>> file mode 100644 index 0000000..820d70b --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/350-oxnas-reset.patch @@ >>>> -0,0 +1,20 @@ +Index: linux-3.14.18/drivers/reset/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/reset/Kconfig >>>> ++++ linux-3.14.18/drivers/reset/Kconfig +@@ -11,3 +11,7 @@ >>>> menuconfig RESET_CONTROLLER + via GPIOs or SoC-internal >>>> reset controller modules. + + If unsure, say no. ++ >>>> ++config RESET_CONTROLLER_OXNAS ++ bool ++ select >>>> RESET_CONTROLLER +Index: linux-3.14.18/drivers/reset/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/reset/Makefile >>>> ++++ linux-3.14.18/drivers/reset/Makefile +@@ -1,2 +1,3 @@ + >>>> obj-$(CONFIG_RESET_CONTROLLER) += core.o >>>> ++obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o + >>>> obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o diff --git >>>> a/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch >>>> b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch new >>>> file mode 100644 index 0000000..a5a1b02 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/400-oxnas-nand.patch @@ -0,0 >>>> +1,28 @@ +Index: linux-3.14.18/drivers/mtd/nand/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/mtd/nand/Kconfig >>>> ++++ linux-3.14.18/drivers/mtd/nand/Kconfig +@@ -510,4 +510,12 >>>> @@ config MTD_NAND_XWAY + Enables support for NAND Flash >>>> chips on Lantiq XWAY SoCs. NAND is attached + to the >>>> External Bus Unit (EBU). + ++config MTD_NAND_OXNAS ++ >>>> tristate "Support for NAND on Plxtech NAS782X SoC" ++ >>>> depends on ARCH_OXNAS ++ select MTD_NAND_PLATFORM ++ help >>>> ++ Enables support for NAND Flash chips on Plxtech NAS782X >>>> SoCs. NAND is attached ++ to the STATIC Unit. ++ + endif # >>>> MTD_NAND +Index: linux-3.14.18/drivers/mtd/nand/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/mtd/nand/Makefile >>>> ++++ linux-3.14.18/drivers/mtd/nand/Makefile +@@ -49,5 +49,6 >>>> @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 + >>>> obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + >>>> obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + >>>> obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ >>>> ++obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o + + >>>> nand-objs := nand_base.o nand_bbt.o diff --git >>>> a/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch >>>> b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch new >>>> file mode 100644 index 0000000..d203734 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/500-oxnas-sata.patch @@ -0,0 >>>> +1,30 @@ +Index: linux-3.14.18/drivers/ata/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/ata/Kconfig >>>> ++++ linux-3.14.18/drivers/ata/Kconfig +@@ -330,6 +330,13 @@ >>>> config SATA_VITESSE + + If unsure, say N. + ++config >>>> SATA_OXNAS ++ tristate "PLXTECH NAS782X SATA support" ++ >>>> help ++ This option enables support for Nas782x Serial ATA >>>> controller. ++ ++ If unsure, say N. ++ + comment "PATA SFF >>>> controllers with BMDMA" + + config PATA_ALI +Index: >>>> linux-3.14.18/drivers/ata/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/ata/Makefile >>>> ++++ linux-3.14.18/drivers/ata/Makefile +@@ -31,6 +31,7 @@ >>>> obj-$(CONFIG_SATA_SVW) += sata_svw.o + >>>> obj-$(CONFIG_SATA_ULI) += sata_uli.o + >>>> obj-$(CONFIG_SATA_VIA) += sata_via.o + >>>> obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o >>>> ++obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o + + # SFF PATA w/ >>>> BMDMA + obj-$(CONFIG_PATA_ALI) += pata_ali.o diff --git >>>> a/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch >>>> b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch new >>>> file mode 100644 index 0000000..94e62a9 --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/800-oxnas-ehci.patch @@ -0,0 >>>> +1,30 @@ +Index: linux-3.14.18/drivers/usb/host/Kconfig >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/usb/host/Kconfig >>>> ++++ linux-3.14.18/drivers/usb/host/Kconfig +@@ -273,6 +273,13 >>>> @@ config USB_OCTEON_EHCI + USB 2.0 device support. All >>>> CN6XXX based chips with USB are + supported. + ++config >>>> USB_EHCI_OXNAS ++ tristate "OXNAS EHCI Module" ++ depends >>>> on USB_EHCI_HCD && ARCH_OXNAS ++ select USB_EHCI_ROOT_HUB_TT >>>> ++ ---help--- ++ Enable support for the OX820 SOC's on-chip >>>> EHCI controller. ++ + endif # USB_EHCI_HCD + + config >>>> USB_OXU210HP_HCD +Index: >>>> linux-3.14.18/drivers/usb/host/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/drivers/usb/host/Makefile >>>> ++++ linux-3.14.18/drivers/usb/host/Makefile +@@ -37,6 +37,7 >>>> @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci- + >>>> obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o + >>>> obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o + >>>> obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o >>>> ++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o + + >>>> obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + >>>> obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git >>>> a/target/linux/oxnas/patches-3.14/900-more-boards.patch >>>> b/target/linux/oxnas/patches-3.14/900-more-boards.patch new >>>> file mode 100644 index 0000000..04bbfaa --- /dev/null +++ >>>> b/target/linux/oxnas/patches-3.14/900-more-boards.patch @@ >>>> -0,0 +1,16 @@ +Index: linux-3.14.18/arch/arm/boot/dts/Makefile >>>> +=================================================================== >>>> >>>> > +--- linux-3.14.18.orig/arch/arm/boot/dts/Makefile >>>> ++++ linux-3.14.18/arch/arm/boot/dts/Makefile +@@ -233,7 >>>> +233,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + >>>> am43x-epos-evm.dtb \ + dra7-evm.dtb + >>>> dtb-$(CONFIG_ARCH_ORION5X) += >>>> orion5x-lacie-ethernet-disk-mini-v2.dtb >>>> +-dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb >>>> ++dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb \ ++ >>>> ox820-pogoplug-v3.dtb \ ++ ox820-stg212.dtb \ ++ >>>> ox820-kd20.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + >>>> dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + >>>> ste-hrefprev60-stuib.dtb \ >>>> >>> _______________________________________________ openwrt-devel >>> mailing list openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >> _______________________________________________ openwrt-devel >> mailing list openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
