Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
target/linux/generic/files/drivers/net/phy/ar8216.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c
b/target/linux/generic/files/drivers/net/phy/ar8216.c
index a4e2260..028b98f 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -70,6 +70,7 @@ struct ar8xxx_mib_desc {
struct ar8xxx_chip {
unsigned long caps;
+ bool config_at_probe;
int (*hw_init)(struct ar8xxx_priv *priv);
void (*cleanup)(struct ar8xxx_priv *priv);
@@ -1821,6 +1822,7 @@ ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32
members)
static const struct ar8xxx_chip ar8327_chip = {
.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
+ .config_at_probe = true,
.hw_init = ar8327_hw_init,
.cleanup = ar8327_cleanup,
.init_globals = ar8327_init_globals,
@@ -2797,7 +2799,7 @@ ar8xxx_phy_config_init(struct phy_device *phydev)
if (WARN_ON(!priv))
return -ENODEV;
- if (chip_is_ar8327(priv) || chip_is_ar8337(priv))
+ if (priv->chip->config_at_probe)
return ar8xxx_phy_check_aneg(phydev);
priv->phy = phydev;
@@ -2973,7 +2975,7 @@ found:
phydev->advertising = ADVERTISED_100baseT_Full;
}
- if (chip_is_ar8327(priv) || chip_is_ar8337(priv)) {
+ if (priv->chip->config_at_probe) {
priv->phy = phydev;
ret = ar8xxx_start(priv);
--
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
