Few weeks ago i've received a Mips CI20 and began to port it to openwrt using kernel 3.18-rc4. For now only few peripherals work "fine" but is more than i initially expected. https://github.com/Pteridium/OpenWRT-experimental/blob/ci20-alpha/README.md Still there are a lot of peripherals to be included, but for initial tests is enough for me.
The cpu performance is a bit disappointing if is taken in mind that runs at 1'2GHz and the ethernet tests with iperf showed <80Mb/s with one thread and <65 with 100. Compiling without generic patches 132-mips_inline_dma_ops, 259-regmap_dynamic, 305-mips_module_reloc, 306-mips_mem_functions_performance and 309-mips_fuse_workaround I were able to enable msc1 and test brcmfmac, but no success: the driver recognizes the bcm4330 but it is unable to configure it correctly. Now i'm working to add the remaining drivers that work with kernel 3.16. What i previously made was simple rebases from the code wrote by Zubair Lutfullah and Paul Burton with a couple of changes in pinctrl and dma drivers. Any comment will be very appreciated. José _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
