--- For two SIM cards from the same operator (Plus GSM) I get error message: "Not provisioned", when try to get MSISDN. Real phone with these cards inserted also cannot display a phone number. I can make calls normally. And other two (different operators) works correctly. Is anybody know why this happens?
commands-dms.c | 16 ++++++++++++++++ commands-dms.h | 2 ++ 2 files changed, 18 insertions(+) diff --git a/commands-dms.c b/commands-dms.c index 563321e..ad5c89d 100644 --- a/commands-dms.c +++ b/commands-dms.c @@ -159,6 +159,22 @@ cmd_dms_get_imsi_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qm return QMI_CMD_REQUEST; } +static void cmd_dms_get_msisdn_cb(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg) +{ + struct qmi_dms_get_msisdn_response res; + + qmi_parse_dms_get_msisdn_response(msg, &res); + if (res.data.msisdn) + blobmsg_add_string(&status, NULL, res.data.msisdn); +} + +static enum qmi_cmd_result +cmd_dms_get_msisdn_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) +{ + qmi_set_dms_get_msisdn_request(msg); + return QMI_CMD_REQUEST; +} + #define cmd_dms_reset_cb no_cb static enum qmi_cmd_result cmd_dms_reset_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) diff --git a/commands-dms.h b/commands-dms.h index 1f21b13..c20d007 100644 --- a/commands-dms.h +++ b/commands-dms.h @@ -8,6 +8,7 @@ __uqmi_command(dms_set_new_pin, new-pin, required, CMD_TYPE_OPTION), \ __uqmi_command(dms_get_iccid, get-iccid, no, QMI_SERVICE_DMS), \ __uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \ + __uqmi_command(dms_get_msisdn, get-msisdn, no, QMI_SERVICE_DMS), \ __uqmi_command(dms_set_operating_mode, set-device-operating-mode, required, QMI_SERVICE_DMS), \ __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \ @@ -23,6 +24,7 @@ " --new-pin <new pin>: New pin\n" \ " --get-iccid: Get the ICCID\n" \ " --get-imsi: Get International Mobile Subscriber ID\n" \ + " --get-msisdn: Get the MSISDN (telephone number)\n" \ " --reset-dms: Reset the DMS service\n" \ " --set-device-operating-mode <m> Set the device operating mode\n" \ " (modes: online, low_power, factory_test, offline\n" \ -- 1.9.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel