On 09.11.2014 00:19, Heiner Kallweit wrote: > Am 08.11.2014 um 13:49 schrieb Dirk Neukirchen: >> On 31.10.2014 21:46, Heiner Kallweit wrote: >>> Patch series adds more abstraction to the driver, adds smaller improvements >>> and fixes an issue with kernels >= 3.14. >>> Ticket 17800: With kernel 3.14 sometimes ports operate at 10/half only >>> >>> This patch series works for me on: >>> TP-LINK TL-WDR4300 ( ar71xx + AR8327v2) >>> TP-LINK TL-WDR4900 (mpc85xx + AR8327v4) >>> >>> I'd appreciate if others with non-AR8327 switches supported by the >>> ar8216 driver test this patch series. >>> >>> Rgds, Heiner >> >> I was testing this series on a TP-LINK TL-WDR3600 ( ar71xx + AR8327v2) >> but with default kernel (3.10.58). - as I understand this is supposed to >> work too >> >> I encountered an error: WAN (eth0.2) does not work. (LAN seems fine) >> The dmesg seems to be identical between patched+unpatched. Both list >> >> switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0 >> ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, >> driver=Atheros AR8216/AR8236/AR8316] >> eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII > Dirk, > here come updated versions of patches 3-5 from the series. I'd appreciate if > you could test the updated series. > changes: > patch 3|4: keep phy_fixup callback closer to the original fixup code > patch 5: less intrusive, doesn't touch advertising > > Regards, Heiner >
I tested your updated series. TP-Link WDR3600 ( ar71xx + AR8327v2) WAN is working again Additionally I tested your series on a Sitecom WLR8100 ( ar71xx + AR8337v2) - it works with 3.10.58 there too _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel