EOL as in not produced anymore or has no existing users ?
On 23/09/2014 21:33, Michael Heimpold wrote:
> This board is EOL, we should not bother anymore with it.
>
> Signed-off-by: Michael Heimpold <m...@heimpold.de> ---
> .../files-3.10/arch/arm/mach-at91/board-tqma9263.c | 219
> --------------------
> .../files-3.14/arch/arm/mach-at91/board-tqma9263.c | 219
> --------------------
> .../at91/patches-3.10/700-tqma9263-support.patch | 25 ---
> .../at91/patches-3.14/700-tqma9263-support.patch | 25 --- 4
> files changed, 488 deletions(-) delete mode 100644
> target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
> delete mode 100644
> target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
> delete mode 100644
> target/linux/at91/patches-3.10/700-tqma9263-support.patch delete
> mode 100644
> target/linux/at91/patches-3.14/700-tqma9263-support.patch
>
> diff --git
> a/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
> b/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
> deleted file mode 100644 index cae1fe9..0000000 ---
> a/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
> +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright (C) 2008 I2SE
> GmbH - * Copyright (C) 2010 IEQualize GmbH - * Copyright (C)
> 2010-2011 Michael Heimpold - * - * This program is free software;
> you can redistribute it and/or modify - * it under the terms of the
> GNU General Public License as published by - * the Free Software
> Foundation; either version 2 of the License, or - * (at your
> option) any later version. - * - * This program is distributed in
> the hope that it will be useful, - * but WITHOUT ANY WARRANTY;
> without even the implied warranty of - * MERCHANTABILITY or FITNESS
> FOR A PARTICULAR PURPOSE. See the - * GNU General Public License
> for more details. - * - * You should have received a copy of the
> GNU General Public License - * along with this program; if not,
> write to the Free Software - * Foundation, Inc., 59 Temple Place,
> Suite 330, Boston, MA 02111-1307 USA - */ - -#include
> <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h>
> -#include <linux/module.h> -#include <linux/platform_device.h>
> -#include <linux/fb.h> - -#include <mach/hardware.h> -#include
> <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -
> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include
> <asm/mach/irq.h> - -#include <mach/board.h> -#include
> <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include
> <video/atmel_lcdc.h> - -#include "sam9_smc.h" -#include
> "generic.h" - -#include <linux/atmel_serial.h> - - -static void
> __init tqma9263_map_io(void) -{ - unsigned pins; - - /* Initialize
> processor: 18.432 MHz crystal */ - at91_initialize(18432000); - -
> /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0);
> - - /* USART0 on ttyS1 */ - pins = ATMEL_UART_CTS | ATMEL_UART_RTS
> | - ATMEL_UART_DSR | ATMEL_UART_DTR | -
> ATMEL_UART_DCD | ATMEL_UART_RI; -
> at91_register_uart(AT91SAM9263_ID_US0, 1, pins); - - /* USART1 on
> ttyS2 */ - pins = ATMEL_UART_RTS; -
> at91_register_uart(AT91SAM9263_ID_US1, 2, pins); - - /* USART2 on
> ttyS3 */ - pins = ATMEL_UART_RTS; -
> at91_register_uart(AT91SAM9263_ID_US2, 3, pins); - - /* set serial
> console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} -
> - -/* - * USB Host port - */ -static struct at91_usbh_data
> __initdata tqma9263_usbh_data = { - .ports = 2, -
> .vbus_pin = {
> AT91_PIN_PA24, AT91_PIN_PA21 }, - .vbus_pin_active_low = 0, -}; -
> - -/* - * USB Device port - */ -static struct at91_udc_data
> __initdata tqma9263_udc_data = { - .vbus_pin = AT91_PIN_PA25, -
> .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/*
> - * MCI
> (SD/MMC) - */ -static struct at91_mmc_data __initdata
> tqma9263_mmc_data = { - .wire4 = 1, - .det_pin =
> AT91_PIN_PE18, -
> .wp_pin = AT91_PIN_PB28, -}; - - -/* - * MACB Ethernet device -
> */ -static struct macb_platform_data __initdata tqma9263_macb_data
> = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - -
> -/* - *
> I2C devices - */ -static struct i2c_board_info __initdata
> tqma9263_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563",
> 0x51),
> - }, - { - I2C_BOARD_INFO("24c04", 0x52), - }, -};
> - - -/* - *
> NAND flash - */ -static struct mtd_partition __initdata
> tqma9263_nand_partition[] = { - { - .name = "uboot", -
> .offset =
> 0, - .size = 3 * SZ_128K, - }, - { - .name
> = "uboot-env", -
> .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, -
> { - .name
> = "linux", - .offset = MTDPART_OFS_NXTBLK, - .size =
> SZ_2M, - },
> - { - .name = "rootfs", - .offset =
> MTDPART_OFS_NXTBLK, - .size
> = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition *
> __init nand_partitions(int size, int *num_partitions) -{ -
> *num_partitions = ARRAY_SIZE(tqma9263_nand_partition); - return
> tqma9263_nand_partition; -} - -static struct atmel_nand_data
> __initdata tqma9263_nand_data = { - .ale = 21, - .cle
> = 22, -
> .rdy_pin = AT91_PIN_PD14, - .enable_pin =
> AT91_PIN_PD15, -}; -
> -static struct sam9_smc_config __initdata tqma9263_nand_smc_config
> = { - .ncs_read_setup = 0, - .nrd_setup = 1, -
> .ncs_write_setup =
> 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, -
> .nrd_pulse = 3,
> - .ncs_write_pulse = 3, - .nwe_pulse = 3, - -
> .read_cycle = 5, -
> .write_cycle = 5, - - .mode =
> AT91_SMC_READMODE |
> AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, -
> .tdf_cycles = 2, -}; - -static void __init
> tqma9263_add_device_nand(void) -{ - /* configure chip-select 3
> (NAND) */ - sam9_smc_configure(0, 3, &tqma9263_nand_smc_config); -
> - at91_add_device_nand(&tqma9263_nand_data); -} - - -static void
> __init tqma9263_board_init(void) -{ - /* Serial */ -
> at91_add_device_serial(); - /* USB Host */ -
> at91_add_device_usbh(&tqma9263_usbh_data); - /* USB Device */ -
> at91_add_device_udc(&tqma9263_udc_data); - /* MMC */ -
> at91_add_device_mmc(1, &tqma9263_mmc_data); - /* I2C */ -
> at91_add_device_i2c(tqma9263_i2c_devices,
> ARRAY_SIZE(tqma9263_i2c_devices)); - /* Ethernet */ -
> at91_add_device_eth(&tqma9263_macb_data); - /* NAND flash */ -
> tqma9263_add_device_nand(); -} - -MACHINE_START(TQMA9263, "TQ
> Components TQMa9263") - /* Maintainer: Michael Heimpold */ - .timer
> = &at91sam926x_timer, - .map_io = tqma9263_map_io, -
> .init_irq =
> at91_init_irq_default, - .init_machine = tqma9263_board_init,
> -MACHINE_END diff --git
> a/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
> b/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
> deleted file mode 100644 index cae1fe9..0000000 ---
> a/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
> +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright (C) 2008 I2SE
> GmbH - * Copyright (C) 2010 IEQualize GmbH - * Copyright (C)
> 2010-2011 Michael Heimpold - * - * This program is free software;
> you can redistribute it and/or modify - * it under the terms of the
> GNU General Public License as published by - * the Free Software
> Foundation; either version 2 of the License, or - * (at your
> option) any later version. - * - * This program is distributed in
> the hope that it will be useful, - * but WITHOUT ANY WARRANTY;
> without even the implied warranty of - * MERCHANTABILITY or FITNESS
> FOR A PARTICULAR PURPOSE. See the - * GNU General Public License
> for more details. - * - * You should have received a copy of the
> GNU General Public License - * along with this program; if not,
> write to the Free Software - * Foundation, Inc., 59 Temple Place,
> Suite 330, Boston, MA 02111-1307 USA - */ - -#include
> <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h>
> -#include <linux/module.h> -#include <linux/platform_device.h>
> -#include <linux/fb.h> - -#include <mach/hardware.h> -#include
> <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -
> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include
> <asm/mach/irq.h> - -#include <mach/board.h> -#include
> <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include
> <video/atmel_lcdc.h> - -#include "sam9_smc.h" -#include
> "generic.h" - -#include <linux/atmel_serial.h> - - -static void
> __init tqma9263_map_io(void) -{ - unsigned pins; - - /* Initialize
> processor: 18.432 MHz crystal */ - at91_initialize(18432000); - -
> /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0);
> - - /* USART0 on ttyS1 */ - pins = ATMEL_UART_CTS | ATMEL_UART_RTS
> | - ATMEL_UART_DSR | ATMEL_UART_DTR | -
> ATMEL_UART_DCD | ATMEL_UART_RI; -
> at91_register_uart(AT91SAM9263_ID_US0, 1, pins); - - /* USART1 on
> ttyS2 */ - pins = ATMEL_UART_RTS; -
> at91_register_uart(AT91SAM9263_ID_US1, 2, pins); - - /* USART2 on
> ttyS3 */ - pins = ATMEL_UART_RTS; -
> at91_register_uart(AT91SAM9263_ID_US2, 3, pins); - - /* set serial
> console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} -
> - -/* - * USB Host port - */ -static struct at91_usbh_data
> __initdata tqma9263_usbh_data = { - .ports = 2, -
> .vbus_pin = {
> AT91_PIN_PA24, AT91_PIN_PA21 }, - .vbus_pin_active_low = 0, -}; -
> - -/* - * USB Device port - */ -static struct at91_udc_data
> __initdata tqma9263_udc_data = { - .vbus_pin = AT91_PIN_PA25, -
> .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/*
> - * MCI
> (SD/MMC) - */ -static struct at91_mmc_data __initdata
> tqma9263_mmc_data = { - .wire4 = 1, - .det_pin =
> AT91_PIN_PE18, -
> .wp_pin = AT91_PIN_PB28, -}; - - -/* - * MACB Ethernet device -
> */ -static struct macb_platform_data __initdata tqma9263_macb_data
> = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - -
> -/* - *
> I2C devices - */ -static struct i2c_board_info __initdata
> tqma9263_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563",
> 0x51),
> - }, - { - I2C_BOARD_INFO("24c04", 0x52), - }, -};
> - - -/* - *
> NAND flash - */ -static struct mtd_partition __initdata
> tqma9263_nand_partition[] = { - { - .name = "uboot", -
> .offset =
> 0, - .size = 3 * SZ_128K, - }, - { - .name
> = "uboot-env", -
> .offset = MTDPART_OFS_NXTBLK, - .size = SZ_128K, - }, -
> { - .name
> = "linux", - .offset = MTDPART_OFS_NXTBLK, - .size =
> SZ_2M, - },
> - { - .name = "rootfs", - .offset =
> MTDPART_OFS_NXTBLK, - .size
> = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition *
> __init nand_partitions(int size, int *num_partitions) -{ -
> *num_partitions = ARRAY_SIZE(tqma9263_nand_partition); - return
> tqma9263_nand_partition; -} - -static struct atmel_nand_data
> __initdata tqma9263_nand_data = { - .ale = 21, - .cle
> = 22, -
> .rdy_pin = AT91_PIN_PD14, - .enable_pin =
> AT91_PIN_PD15, -}; -
> -static struct sam9_smc_config __initdata tqma9263_nand_smc_config
> = { - .ncs_read_setup = 0, - .nrd_setup = 1, -
> .ncs_write_setup =
> 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, -
> .nrd_pulse = 3,
> - .ncs_write_pulse = 3, - .nwe_pulse = 3, - -
> .read_cycle = 5, -
> .write_cycle = 5, - - .mode =
> AT91_SMC_READMODE |
> AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, -
> .tdf_cycles = 2, -}; - -static void __init
> tqma9263_add_device_nand(void) -{ - /* configure chip-select 3
> (NAND) */ - sam9_smc_configure(0, 3, &tqma9263_nand_smc_config); -
> - at91_add_device_nand(&tqma9263_nand_data); -} - - -static void
> __init tqma9263_board_init(void) -{ - /* Serial */ -
> at91_add_device_serial(); - /* USB Host */ -
> at91_add_device_usbh(&tqma9263_usbh_data); - /* USB Device */ -
> at91_add_device_udc(&tqma9263_udc_data); - /* MMC */ -
> at91_add_device_mmc(1, &tqma9263_mmc_data); - /* I2C */ -
> at91_add_device_i2c(tqma9263_i2c_devices,
> ARRAY_SIZE(tqma9263_i2c_devices)); - /* Ethernet */ -
> at91_add_device_eth(&tqma9263_macb_data); - /* NAND flash */ -
> tqma9263_add_device_nand(); -} - -MACHINE_START(TQMA9263, "TQ
> Components TQMa9263") - /* Maintainer: Michael Heimpold */ - .timer
> = &at91sam926x_timer, - .map_io = tqma9263_map_io, -
> .init_irq =
> at91_init_irq_default, - .init_machine = tqma9263_board_init,
> -MACHINE_END diff --git
> a/target/linux/at91/patches-3.10/700-tqma9263-support.patch
> b/target/linux/at91/patches-3.10/700-tqma9263-support.patch deleted
> file mode 100644 index d249783..0000000 ---
> a/target/linux/at91/patches-3.10/700-tqma9263-support.patch +++
> /dev/null @@ -1,25 +0,0 @@ ----
> a/arch/arm/mach-at91/Kconfig.non_dt -+++
> b/arch/arm/mach-at91/Kconfig.non_dt -@@ -258,6 +258,12 @@ config
> MACH_USB_A9263 - Select this if you are using a Calao Systems
> USB-A9263. - <http://www.calao-systems.com> - -+config
> MACH_TQMA9263 -+ bool "TQ Components TQMa9263 board" -+ help -+
> Select this if you are using the an TQ Components TQMa9263 board.
> -+ <http://www.tq-components.com/> -+ - endif - - #
> ---------------------------------------------------------- ----
> a/arch/arm/mach-at91/Makefile -+++ b/arch/arm/mach-at91/Makefile
> -@@ -68,6 +68,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar - #
> AT91SAM9263 board-specific support -
> obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o -
> obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
> -+obj-$(CONFIG_MACH_TQMA9263) += board-tqma9263.o - - # AT91SAM9RL
> board-specific support - obj-$(CONFIG_MACH_AT91SAM9RLEK) +=
> board-sam9rlek.o diff --git
> a/target/linux/at91/patches-3.14/700-tqma9263-support.patch
> b/target/linux/at91/patches-3.14/700-tqma9263-support.patch deleted
> file mode 100644 index 5c042da..0000000 ---
> a/target/linux/at91/patches-3.14/700-tqma9263-support.patch +++
> /dev/null @@ -1,25 +0,0 @@ ----
> a/arch/arm/mach-at91/Kconfig.non_dt -+++
> b/arch/arm/mach-at91/Kconfig.non_dt -@@ -281,6 +281,12 @@ config
> MACH_AT91SAM9G10EK - Select this if you are using Atmel's
> AT91SAM9G10-EK Evaluation Kit. -
> <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> -
> -+config MACH_TQMA9263 -+ bool "TQ Components TQMa9263 board" -+
> help -+ Select this if you are using the an TQ Components
> TQMa9263 board. -+ <http://www.tq-components.com/> -+ - endif - -
> # ---------------------------------------------------------- ----
> a/arch/arm/mach-at91/Makefile -+++ b/arch/arm/mach-at91/Makefile
> -@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar - - #
> AT91SAM9263 board-specific support -
> obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
> -+obj-$(CONFIG_MACH_TQMA9263) += board-tqma9263.o - - # AT91SAM9RL
> board-specific support - obj-$(CONFIG_MACH_AT91SAM9RLEK) +=
> board-sam9rlek.o
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
