Nico-
You are completely correct - thank you!
I booted one up in AirOS and it says the firmware version is XW5.5.9.
OK, at least I know what I need to do... does anyone know if all the
Ubiquiti "M" devices are going to become "XW" models?
Thanks again,
Bill
On 9/24/2014 9:54 AM, cholin wrote:
Maybe you have one of these new Loco M5 XW? Support for that device has
been added with r42549 (9 days ago) [1] and is only available in current
trunk (unfortunately not in barrier breaker rc3).
Regards
Nico
[1]
http://git.openwrt.org/?p=openwrt.git;a=commit;h=3d217029ea89de6520e01a471b6dc31924f17327
Am 24.09.2014 um 18:21 schrieb Bill:
I just got 5 LOCO M5 units that won't run OpenWRT. They are datestamped
1422K; when I try to flash them, they give me:
received ERROR <code=2, msg=Firmware check failed>
I am using the Bullet M image
(openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin), flashing
with tftp in binary mode.
I have one other LOCO M5 with datestamp 1340K that works fine - flashes
fine every time. But the new units won't take the firmware at all.
I assume UBNT did something in the bootloader that is disabling OpenWRT.
Any help will be welcome. I can open one up and attach a serial cable,
but I'm not sure what I'd look for or what I'd do about it...
Thanks,
Bill
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
--
Bill Moffitt
Ayrstone Productivity
http://ayrstone.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
