Hi Stephen, do you still have the old working trx, or better, remember how you created it?
That might help debugging the "Starting program" hang... Mathias Am Di, 26.08.2014, 04:34 schrieb Stephen Parry: > No sorry - I did not explain carefully enough: > 1. About 9 months ago I built a trx using trunk that flashed and worked > OK. > 2. Two weeks ago I built a new image. This loaded and tested fine as ELF > via tftp boot so I flashed the trx using MTD command. the resulting image > hung after "starting program at 8001000" just as you described. > 3. I incorrectly thought the problem was that I had flashed incorrectly so > tried CFE flash command instead. > 4. I got parameters of flash command wrong and overwrote CFE. > 5. I saw your patch and kicked myself for not having seen it sooner. > > I was supporting (seconding) your patch by trying to explain that had I > seen it 15 minutes earlier it would have saved me from a dead router. > > Rafa? Mi?ecki <zaj...@gmail.com> wrote: >>First of all, I really don't think this patch itself may cause any >> problem with MTD/partitions/bricking. > >> I don't understand much of your report. > It was working previously? But >> then you say it was hanging? Then you > mention some MTD command >> failing...? What did you do in CFE? Which firmware did you try to >> install at all? What was the log of firmware booting & destroying your >> CFE? >> This "report" says nothing >> :(_______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
