- Add a, n and variants hwmodes.
- Add htmode.
- Check if hwmodes are supported.
Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
---
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
index 4ae2f77..8caa165 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
@@ -338,10 +338,25 @@ if hwtype == "broadcom" then
end
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
- mode:value("11bg", "802.11b+g")
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11gst", "802.11g + Turbo")
+ if hw_modes.n then
+ if hw_modes.g then mode:value("11ng", "802.11g+n") end
+ if hw_modes.a then mode:value("11na", "802.11a+n") end
+ mode:value("11n", "802.11n")
+
+ htmode = s:taboption("advanced", ListValue, "htmode",
translate("HT mode (802.11n)"))
+ htmode:depends("hwmode", "11n")
+ htmode:depends("hwmode", "11ng")
+ htmode:depends("hwmode", "11na")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40-", translate("40MHz 2nd channel below"))
+ htmode:value("HT40+", translate("40MHz 2nd channel above"))
+ end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+ if hw_modes.b and hw_modes.g then mode:value("11bg", "802.11b+g") end
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.g then mode:value("11gst", "802.11g Turbo") end
+ if hw_modes.g then mode:value("11lrs", "802.11g Limited Rate Support")
end
ant1 = s:taboption("advanced", ListValue, "txantenna",
translate("Transmitter Antenna"))
ant1.widget = "radio"
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
