no sir! after applying this one liner to my 3.14.13 (instead of the 3.14.12 kernel that Zhao used in his patches) and quick rebuild, my wndr3700v4 will not boot; it shows 2 steady amber lights...
so this test fails as well ...next one please! ;P On Sat, 2014-07-26 at 19:49 +0200, Rafał Miłecki wrote: > On 26 July 2014 16:50, Zhao, Gang <gang.zhao...@gmail.com> wrote: > > On Sat, 2014-07-26 at 22:17:36 +0800, Zhao, Gang wrote: > >> On Sat, 2014-07-26 at 12:00:21 +0800, Zhao, Gang wrote: > >>> On Sat, 2014-07-26 at 10:48:35 +0800, Zhao, Gang wrote: > >>>> Tested on a tp-link wr703n, all seem okay. > >>>> > >>> Oh, it seems there are some problems about the phy, all network cards > >>> are unusable :-( Will investigate it later. At least this patch set made > >>> a bootable kernel... > >>> > >> The problem is it always says "no carrier" even if i plug the cable > >> between router and my computer. > >> > >> [...] > > [ 2653.640000] br-lan: port 1(eth0) entered disabled state > > > > The problem is about bridge. br-lan didn't bring the interface to > > forwarding mode. Keep going... > > Just guessing (really guessing!): maybe it's similar to the > http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=6214350733ad29939ec827d242dbe2e9570ecb87 > ? >
signature.asc
Description: This is a digitally signed message part
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
