The airGateway has a reset button connected to GPIO 12, so we should use it.
Signed-off-by: Matthew Reeve <mre...@tenxnetworks.com>
diff --git
a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
index d64007d..0fe62d9 100644
---
a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
+++
b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
@@ -12,7 +12,7 @@
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
-@@ -389,3 +391,50 @@ static void __init ubnt_nano_m_xw_setup(
+@@ -389,3 +391,65 @@ static void __init ubnt_nano_m_xw_setup(
MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M
XW",
ubnt_nano_m_xw_setup);
@@ -27,6 +27,17 @@
+ },
+};
+
++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = 12,
++ .active_low = 1,
++ }
++};
++
+static void __init ubnt_airgateway_setup(void)
+{
+ u32 t;
@@ -49,6 +60,10 @@
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
+ ubnt_airgateway_gpio_leds);
+
++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(airgateway_gpio_keys),
++ airgateway_gpio_keys);
++
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
