Hi, On Fri, Jul 4, 2014 at 1:33 PM, Álvaro Fernández Rojas <nolt...@gmail.com> wrote: > By using uci-defaults force_link is enabled, which fixes some link issues if > ethernet cable isn't connected when LAN is initialized. > > Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com> > --- (snip) > diff --git a/target/linux/brcm2708/base-files/etc/uci-defaults/02_network > b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network > new file mode 100644 > index 0000000..588fff3 > --- /dev/null > +++ b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network > @@ -0,0 +1,11 @@ > +#!/bin/sh > +# Copyright (C) 2014 OpenWrt.org > + > +. /lib/functions/uci-defaults.sh > + > +ucidef_set_interface_loopback > +ucidef_set_interface_lan "eth0" > + > +uci commit network
This will break for sysupgrade with existing configs (if it were supported) or images with custom network config from files/; your first action should be [ -e /etc/config/network ] && exit 0 like it is done on other targets. Jonas _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
