On 1 July 2014 17:13, John Crispin <j...@phrozen.org> wrote: > > > On 01/07/2014 16:11, Roman Yeryomin wrote: >> On 1 July 2014 13:57, John Crispin <j...@phrozen.org> wrote: >>>> Great, >>>> >>>> Roman can you test / confirm that this fixes the problem on >>>> rt-n14 ? i don't have that unit myself so i cannot test. >> Yes, it fixes the default configuration. But I still don't >> understand why I cannot change neither vid not member ports: >> >> root@OpenWrt:/# swconfig dev switch0 vlan 1 show VLAN 1: vid: 1 >> ports: 1 2 3 4 6t root@OpenWrt:/# swconfig dev switch0 vlan 1 set >> ports '3 4 6t' root@OpenWrt:/# swconfig dev switch0 vlan 1 show >> VLAN 1: vid: 1 ports: 1 2 3 4 6t >> >> So is it broken or what? Although I didn't check earlier versions >> it seems broken to me... >> > > sounds broken, added to my todo list ....
Figured it out: swconfig dev switch0 set apply Completely in-obvious way, seems the help messages should be improved :) Regards, Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
