From: L. D. Pinney <ldpin...@gmail.com>
This patch adds support for the EasyLink EL-M150 and M-mini
http://wiki.openwrt.org/toh/easylink/el-m150
http://wiki.openwrt.org/toh/easylink/el-m-mini
Signed-off-by: L. D. Pinney <ldpin...@gmail.com>
------------------------------------------------
Index: target/linux/ar71xx/config-3.10
===================================================================
--- target/linux/ar71xx/config-3.10 (revision 41055)
+++ target/linux/ar71xx/config-3.10 (working copy)
@@ -47,6 +47,8 @@
CONFIG_ATH79_MACH_DIR_825_C1=y
CONFIG_ATH79_MACH_DRAGINO2=y
CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EL_M150=y
+CONFIG_ATH79_MACH_EL_MINI=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_GS_OOLITE=y
CONFIG_ATH79_MACH_HORNET_UB=y
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 41055)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
@@ -91,6 +91,12 @@
hwver="v${hwver#0}"
case "$hwid" in
+ "015000"*)
+ model="ELink EL-M150"
+ ;;
+ "015300"*)
+ model="ELink EL-MINI"
+ ;;
"3C0001"*)
model="OOLITE"
;;
@@ -307,6 +313,12 @@
*EAP7660D)
name="eap7660d"
;;
+ *EL-M150)
+ name="el-m150"
+ ;;
+ *EL-MINI)
+ name="el-mini"
+ ;;
*JA76PF)
name="ja76pf"
;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh (revision
41055)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh (working
copy)
@@ -224,6 +224,8 @@
;;
archer-c7 | \
+ el-m150 | \
+ el-mini | \
oolite | \
tl-mr10u | \
tl-mr11u | \
Index:
target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
===================================================================
---
target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
(revision 41055)
+++
target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
(working copy)
@@ -81,6 +81,7 @@
migrate_switch_name "eth0" "switch0"
;;
+el-m150|\
rb-450)
migrate_switch_name "eth1" "switch0"
;;
Index: target/linux/ar71xx/base-files/etc/uci-defaults/02_network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/02_network (revision
41055)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network (working
copy)
@@ -148,6 +148,13 @@
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
+el-mini|\
+el-m150)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ;;
+
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh (revision 41055)
+++ target/linux/ar71xx/base-files/etc/diag.sh (working copy)
@@ -65,6 +65,10 @@
eap7660d)
status_led="eap7660d:green:ds4"
;;
+ el-mini | \
+ el-m150)
+ status_led="elink:green:system"
+ ;;
hiwifi-hc6361)
status_led="hiwifi:blue:system"
;;
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 41055)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -1132,6 +1132,8 @@
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V1,archer-c7-v1,ARCHER-C7,ttyS0,115200,0x75000001,1,8Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V2,archer-c7-v2,ARCHER-C7,ttyS0,115200,0xc7000002,1,16Mlzma))
+$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ELM150,el-m150,EL-M150,ttyATH0,115200,0x01500101,1,8Mlzma))
+$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ELMINI,el-mini,EL-MINI,ttyATH0,115200,0x01530001,1,8Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma))
Index: target/linux/ar71xx/generic/profiles/easy-link.mk
===================================================================
--- /dev/null
+++ target/linux/ar71xx/generic/profiles/easy-link.mk
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License
v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ELM150
+ NAME:=ELINK EL-M150
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+
+define Profile/ELM150/Description
+ Package set optimized for the ELINK EL-M150.
+endef
+$(eval $(call Profile,ELM150))
+
+
+define Profile/ELMINI
+ NAME:=ELINK EL-MINI
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+
+define Profile/ELMINI/Description
+ Package set optimized for the ELINK EL-MINI.
+endef
+$(eval $(call Profile,ELMINI))
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
===================================================================
--- /dev/null
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
@@ -0,0 +1,112 @@
+/*
+ * Easy-Link EL-M150 board support
+ *
+ * Copyright (C) 2012 huangfc <huangfangch...@163.com>
+ * Copyright (C) 2012 HYS <550663...@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
it
+ * under the terms of the GNU General Public License version 2 as
published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define EL_M150_GPIO_BTN6 6
+#define EL_M150_GPIO_BTN7 7
+#define EL_M150_GPIO_BTN_RESET 11
+
+#define EL_M150_GPIO_LED_SYSTEM 27
+#define EL_M150_GPIO_USB_POWER 8
+
+#define EL_M150_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL)
+
+static const char *EL_M150_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data EL_M150_flash_data = {
+ .part_probes = EL_M150_part_probes,
+};
+
+static struct gpio_led EL_M150_leds_gpio[] __initdata = {
+ {
+ .name = "elink:green:system",
+ .gpio = EL_M150_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "BTN_6",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN6,
+ .active_low = 1,
+ },
+ {
+ .desc = "BTN_7",
+ .type = EV_KEY,
+ .code = BTN_7,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN7,
+ .active_low = 1,
+ },
+};
+
+static void __init el_m150_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio),
+ EL_M150_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(EL_M150_gpio_keys),
+ EL_M150_gpio_keys);
+
+ gpio_request_one(EL_M150_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_m25p80(&EL_M150_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150",
+ "ELINK EL-M150", el_m150_setup);
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
===================================================================
--- /dev/null
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
@@ -0,0 +1,86 @@
+/*
+ * Easy-Link EL-MINI board support
+ *
+ * Copyright (C) 2012 huangfc <huangfangch...@163.com>
+ * Copyright (C) 2011 hys <550663...@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
it
+ * under the terms of the GNU General Public License version 2 as
published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MINI_GPIO_LED_SYSTEM 27
+#define MINI_GPIO_BTN_RESET 11
+
+#define MINI_GPIO_USB_POWER 8
+
+#define MINI_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MINI_KEYS_DEBOUNCE_INTERVAL (3 * MINI_KEYS_POLL_INTERVAL)
+
+static const char *mini_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data mini_flash_data = {
+ .part_probes = mini_part_probes,
+};
+
+static struct gpio_led mini_leds_gpio[] __initdata = {
+ {
+ .name = "elink:green:system",
+ .gpio = MINI_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mini_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MINI_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init el_mini_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&mini_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio),
+ mini_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mini_gpio_keys),
+ mini_gpio_keys);
+
+ gpio_request_one(MINI_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "ELINK EL-MINI",
+ el_mini_setup);
Index:
target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EL-LINK-support.patch
===================================================================
--- /dev/null
+++
target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EL-LINK-support.patch
@@ -0,0 +1,52 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -50,7 +50,9 @@ enum ath79_mach_type {
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin
Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router
Platform */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
++ ATH79_MACH_EL_M150, /* ELINK EL-M150 */
++ ATH79_MACH_EL_MINI, /* ELINK EL-MINI */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -337,6 +337,26 @@ config ATH79_MACH_EW_DORIN
+ Say 'Y' here if you want your kernel to support the
+ Dorin Platform from www.80211.de .
+
++config ATH79_MACH_EL_M150
++ bool "ELINK EL-M150 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_EL_MINI
++ bool "ELINK EL-MINI support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_GS_OOLITE
+ bool "GS Oolite V1 support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -62,6 +62,8 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
+ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
+ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+ obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
++obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
+ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
+ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
Index: target/linux/ar71xx/config-3.10
===================================================================
--- target/linux/ar71xx/config-3.10 (revision 41040)
+++ target/linux/ar71xx/config-3.10 (working copy)
@@ -47,6 +47,8 @@
CONFIG_ATH79_MACH_DIR_825_C1=y
CONFIG_ATH79_MACH_DRAGINO2=y
CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EL_M150=y
+CONFIG_ATH79_MACH_EL_MINI=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_GS_OOLITE=y
CONFIG_ATH79_MACH_HORNET_UB=y
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 41040)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
@@ -91,6 +91,12 @@
hwver="v${hwver#0}"
case "$hwid" in
+ "015000"*)
+ model="ELink EL-M150"
+ ;;
+ "015300"*)
+ model="ELink EL-MINI"
+ ;;
"3C0001"*)
model="OOLITE"
;;
@@ -307,6 +313,12 @@
*EAP7660D)
name="eap7660d"
;;
+ *EL-M150)
+ name="el-m150"
+ ;;
+ *EL-MINI)
+ name="el-mini"
+ ;;
*JA76PF)
name="ja76pf"
;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh (revision 41040)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh (working copy)
@@ -224,6 +224,8 @@
;;
archer-c7 | \
+ el-m150 | \
+ el-mini | \
oolite | \
tl-mr10u | \
tl-mr11u | \
Index: target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration (revision 41040)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration (working copy)
@@ -81,6 +81,7 @@
migrate_switch_name "eth0" "switch0"
;;
+el-m150|\
rb-450)
migrate_switch_name "eth1" "switch0"
;;
Index: target/linux/ar71xx/base-files/etc/uci-defaults/02_network
===================================================================
--- target/linux/ar71xx/base-files/etc/uci-defaults/02_network (revision 41040)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network (working copy)
@@ -148,6 +148,13 @@
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
+el-mini|\
+el-m150)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ;;
+
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh (revision 41040)
+++ target/linux/ar71xx/base-files/etc/diag.sh (working copy)
@@ -65,6 +65,10 @@
eap7660d)
status_led="eap7660d:green:ds4"
;;
+ el-mini | \
+ el-m150)
+ status_led="elink:green:system"
+ ;;
hiwifi-hc6361)
status_led="hiwifi:blue:system"
;;
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 41040)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -1132,6 +1132,8 @@
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V1,archer-c7-v1,ARCHER-C7,ttyS0,115200,0x75000001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ARCHERC7V2,archer-c7-v2,ARCHER-C7,ttyS0,115200,0xc7000002,1,16Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELM150,el-m150,EL-M150,ttyATH0,115200,0x01500101,1,8Mlzma))
+$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,ELMINI,el-mini,EL-MINI,ttyATH0,115200,0x01530001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma))
Index: target/linux/ar71xx/generic/profiles/easy-link.mk
===================================================================
--- /dev/null
+++ target/linux/ar71xx/generic/profiles/easy-link.mk
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ELM150
+ NAME:=ELINK EL-M150
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+
+define Profile/ELM150/Description
+ Package set optimized for the ELINK EL-M150.
+endef
+$(eval $(call Profile,ELM150))
+
+
+define Profile/ELMINI
+ NAME:=ELINK EL-MINI
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+
+define Profile/ELMINI/Description
+ Package set optimized for the ELINK EL-MINI.
+endef
+$(eval $(call Profile,ELMINI))
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
===================================================================
--- /dev/null
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
@@ -0,0 +1,112 @@
+/*
+ * Easy-Link EL-M150 board support
+ *
+ * Copyright (C) 2012 huangfc <huangfangch...@163.com>
+ * Copyright (C) 2012 HYS <550663...@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define EL_M150_GPIO_BTN6 6
+#define EL_M150_GPIO_BTN7 7
+#define EL_M150_GPIO_BTN_RESET 11
+
+#define EL_M150_GPIO_LED_SYSTEM 27
+#define EL_M150_GPIO_USB_POWER 8
+
+#define EL_M150_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL)
+
+static const char *EL_M150_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data EL_M150_flash_data = {
+ .part_probes = EL_M150_part_probes,
+};
+
+static struct gpio_led EL_M150_leds_gpio[] __initdata = {
+ {
+ .name = "elink:green:system",
+ .gpio = EL_M150_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "BTN_6",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN6,
+ .active_low = 1,
+ },
+ {
+ .desc = "BTN_7",
+ .type = EV_KEY,
+ .code = BTN_7,
+ .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EL_M150_GPIO_BTN7,
+ .active_low = 1,
+ },
+};
+
+static void __init el_m150_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio),
+ EL_M150_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(EL_M150_gpio_keys),
+ EL_M150_gpio_keys);
+
+ gpio_request_one(EL_M150_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_m25p80(&EL_M150_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150",
+ "ELINK EL-M150", el_m150_setup);
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
===================================================================
--- /dev/null
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
@@ -0,0 +1,86 @@
+/*
+ * Easy-Link EL-MINI board support
+ *
+ * Copyright (C) 2012 huangfc <huangfangch...@163.com>
+ * Copyright (C) 2011 hys <550663...@qq.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MINI_GPIO_LED_SYSTEM 27
+#define MINI_GPIO_BTN_RESET 11
+
+#define MINI_GPIO_USB_POWER 8
+
+#define MINI_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MINI_KEYS_DEBOUNCE_INTERVAL (3 * MINI_KEYS_POLL_INTERVAL)
+
+static const char *mini_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data mini_flash_data = {
+ .part_probes = mini_part_probes,
+};
+
+static struct gpio_led mini_leds_gpio[] __initdata = {
+ {
+ .name = "elink:green:system",
+ .gpio = MINI_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mini_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MINI_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init el_mini_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&mini_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio),
+ mini_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mini_gpio_keys),
+ mini_gpio_keys);
+
+ gpio_request_one(MINI_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "ELINK EL-MINI",
+ el_mini_setup);
Index: target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EL-LINK-support.patch
===================================================================
--- /dev/null
+++ target/linux/ar71xx/patches-3.10/712-MIPS-ath79-add-EL-LINK-support.patch
@@ -0,0 +1,52 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -50,7 +50,9 @@ enum ath79_mach_type {
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
++ ATH79_MACH_EL_M150, /* ELINK EL-M150 */
++ ATH79_MACH_EL_MINI, /* ELINK EL-MINI */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -337,6 +337,26 @@ config ATH79_MACH_EW_DORIN
+ Say 'Y' here if you want your kernel to support the
+ Dorin Platform from www.80211.de .
+
++config ATH79_MACH_EL_M150
++ bool "ELINK EL-M150 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_EL_MINI
++ bool "ELINK EL-MINI support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_GS_OOLITE
+ bool "GS Oolite V1 support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -62,6 +62,8 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
+ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
+ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+ obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
++obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
+ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
+ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
