>From c65d737b77b063f64cdbe042b49dae8ee690ed28 Mon Sep 17 00:00:00 2001
From: Matthew Fatheree <matthew.fathe...@belkin.com>
Date: Sun, 4 May 2014 23:45:26 +0700
Subject: [PATCH 28/30] mamba mvebu: add wifi.lua to mrvl_wlan_v7drv package
Mamba wireless driver requires to customize the WebUI wireless
configuration page. The wifi.lua.mamba is used to replace the default
wifi.lua file from luci.
Signed-off-by: Matthew Fatheree <matthew.fathe...@belkin.com>
---
package/network/mrvl_wlan_v7drv/Makefile | 2 +
package/network/mrvl_wlan_v7drv/files/wifi.lua | 1141 ++++++++++++++++++++++++
2 files changed, 1143 insertions(+)
create mode 100644 package/network/mrvl_wlan_v7drv/files/wifi.lua
diff --git a/package/network/mrvl_wlan_v7drv/Makefile
b/package/network/mrvl_wlan_v7drv/Makefile
index c193c09..38ded49 100644
--- a/package/network/mrvl_wlan_v7drv/Makefile
+++ b/package/network/mrvl_wlan_v7drv/Makefile
@@ -34,6 +34,7 @@ define Package/mrvl_wlan_v7drv/install
$(INSTALL_DIR) $(1)/lib/modules/$(LINUX_VERSION)
$(INSTALL_DIR) $(1)/etc/modules.d
$(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_DIR) $(1)/usr/lib/lua/luci/model/cbi/admin_network
$(INSTALL_BIN) files/marvell.sh $(1)/lib/wifi
$(INSTALL_BIN) files/wireless $(1)/etc/config
@@ -44,6 +45,7 @@ define Package/mrvl_wlan_v7drv/install
$(INSTALL_BIN) files/wps-hotplug.sh $(1)/lib/wifi
$(INSTALL_BIN) files/hostapd $(1)/usr/sbin
$(INSTALL_BIN) files/hostapd_cli $(1)/usr/sbin
+ $(INSTALL_BIN) files/wifi.lua
$(1)/usr/lib/lua/luci/model/cbi/admin_network/wifi.lua
endef
$(eval $(call BuildPackage,mrvl_wlan_v7drv))
diff --git a/package/network/mrvl_wlan_v7drv/files/wifi.lua
b/package/network/mrvl_wlan_v7drv/files/wifi.lua
new file mode 100644
index 0000000..fd996c5
--- /dev/null
+++ b/package/network/mrvl_wlan_v7drv/files/wifi.lua
@@ -0,0 +1,1141 @@
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2008 Steven Barth <ste...@midlink.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id: wifi.lua 9558M 2013-12-12 16:27:16Z (local) $
+]]--
+
+local wa = require "luci.tools.webadmin"
+local nw = require "luci.model.network"
+local ut = require "luci.util"
+local nt = require "luci.sys".net
+local fs = require "nixio.fs"
+
+arg[1] = arg[1] or ""
+
+m = Map("wireless", "",
+ translate("The <em>Device Configuration</em> section covers physical
settings of the radio " ..
+ "hardware such as channel, transmit power or antenna selection
which is shared among all " ..
+ "defined wireless networks (if the radio hardware is multi-SSID
capable). Per network settings " ..
+ "like encryption or operation mode are grouped in the
<em>Interface Configuration</em>."))
+
+m:chain("network")
+m:chain("firewall")
+
+local ifsection
+
+function m.on_commit(map)
+ local wnet = nw:get_wifinet(arg[1])
+ if ifsection and wnet then
+ ifsection.section = wnet.sid
+ m.title = luci.util.pcdata(wnet:get_i18n())
+ end
+end
+
+nw.init(m.uci)
+
+local wnet = nw:get_wifinet(arg[1])
+local wdev = wnet and wnet:get_device()
+
+-- redirect to overview page if network does not exist anymore (e.g. after a
revert)
+if not wnet or not wdev then
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
+ return
+end
+
+-- wireless toggle was requested, commit and reload page
+function m.parse(map)
+ if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
+ if wdev:get("disabled") == "1" or wnet:get("disabled") == "1"
then
+ wnet:set("disabled", nil)
+ else
+ wnet:set("disabled", "1")
+ end
+ wdev:set("disabled", nil)
+
+ nw:commit("wireless")
+ luci.sys.call("(env -i /sbin/wifi down; env -i /sbin/wifi up)
>/dev/null 2>/dev/null")
+
+
luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
+ Map.parse(map)
+end
+
+m.title = luci.util.pcdata(wnet:get_i18n())
+
+
+local function txpower_list(iw)
+ local list = iw.txpwrlist or { }
+ local off = tonumber(iw.txpower_offset) or 0
+ local new = { }
+ local prev = -1
+ local _, val
+ for _, val in ipairs(list) do
+ local dbm = val.dbm + off
+ local mw = math.floor(10 ^ (dbm / 10))
+ if mw ~= prev then
+ prev = mw
+ new[#new+1] = {
+ display_dbm = dbm,
+ display_mw = mw,
+ driver_dbm = val.dbm,
+ driver_mw = val.mw
+ }
+ end
+ end
+ return new
+end
+
+local function txpower_current(pwr, list)
+ pwr = tonumber(pwr)
+ if pwr ~= nil then
+ local _, item
+ for _, item in ipairs(list) do
+ if item.driver_dbm >= pwr then
+ return item.driver_dbm
+ end
+ end
+ end
+ return (list[#list] and list[#list].driver_dbm) or pwr or 0
+end
+
+local iw = luci.sys.wifi.getiwinfo(arg[1])
+local hw_modes = iw.hwmodelist or { }
+local tx_power_list = txpower_list(iw)
+local tx_power_cur = txpower_current(wdev:get("txpower"), tx_power_list)
+
+s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device
Configuration"))
+s.addremove = false
+
+s:tab("general", translate("General Setup"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
+
+--[[
+back = s:option(DummyValue, "_overview", translate("Overview"))
+back.value = ""
+back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
+]]
+
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/wifi_status"
+st.ifname = arg[1]
+
+en = s:taboption("general", Button, "__toggle")
+
+if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
+ en.title = translate("Wireless network is disabled")
+ en.inputtitle = translate("Enable")
+ en.inputstyle = "apply"
+else
+ en.title = translate("Wireless network is enabled")
+ en.inputtitle = translate("Disable")
+ en.inputstyle = "reset"
+end
+
+
+local hwtype = wdev:get("type")
+local htcaps = wdev:get("ht_capab") and true or false
+
+-- NanoFoo
+local nsantenna = wdev:get("antenna")
+
+-- Check whether there is a client interface on the same radio,
+-- if yes, lock the channel choice as the station will dicatate the freq
+local has_sta = nil
+local _, net
+for _, net in ipairs(wdev:get_wifinets()) do
+ if net:mode() == "sta" and net:id() ~= wnet:id() then
+ has_sta = net
+ break
+ end
+end
+
+if has_sta then
+ ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
+ ch.value = translatef("Locked to channel %d used by %s",
+ has_sta:channel(), has_sta:shortname())
+else
+if hwtype == "marvell" then
+--US_CH_LIST_2G="1,2,3,4,5,6,7,8,9,10,11"
+--US_CH_LIST_5G="36,40,44,48,149,153,157,161"
+ ch = s:taboption("general", Value, "channel", translate("Channel"))
+ ch:value("1", translate("Channe 1 - 2.412GHz"))
+ ch:value("2", translate("Channe 2 - 2.417GHz"))
+ ch:value("3", translate("Channe 3 - 2.422GHz"))
+ ch:value("4", translate("Channe 4 - 2.427GHz"))
+ ch:value("5", translate("Channe 5 - 2.432GHz"))
+ ch:value("6", translate("Channe 6 - 2.437GHz"))
+ ch:value("7", translate("Channe 7 - 2.442GHz"))
+ ch:value("8", translate("Channe 8 - 2.447GHz"))
+ ch:value("9", translate("Channe 9 - 2.452GHz"))
+ ch:value("10", translate("Channe 10 - 2.457GHz"))
+ ch:value("11", translate("Channe 11 - 2.462GHz"))
+ ch:value("36", translate("Channe 36 - 5.180GHz"))
+ ch:value("40", translate("Channe 40 - 5.200GHz"))
+ ch:value("44", translate("Channe 44 - 5.220GHz"))
+ ch:value("48", translate("Channe 48 - 5.240GHz"))
+ ch:value("149", translate("Channe 149 - 5.745GHz"))
+ ch:value("153", translate("Channe 153 - 5.765GHz"))
+ ch:value("157", translate("Channe 157 - 5.785GHz"))
+ ch:value("161", translate("Channe 161 - 5.805GHz"))
+else
+ ch = s:taboption("general", Value, "channel", translate("Channel"))
+ ch:value("auto", translate("auto"))
+ for _, f in ipairs(iw and iw.freqlist or { }) do
+ if not f.restricted then
+ ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz
/ 1000 })
+ end
+ end
+end
+end
+
+------------------- MAC80211 Device ------------------
+
+if hwtype == "mac80211" then
+ if #tx_power_list > 1 then
+ tp = s:taboption("general", ListValue,
+ "txpower", translate("Transmit Power"), "dBm")
+ tp.rmempty = true
+ tp.default = tx_power_cur
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...),
tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("", translate("auto"))
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+
+ if htcaps then
+ if hw_modes.g and hw_modes.n then mode:value("11ng",
"802.11g+n") end
+ if hw_modes.a and hw_modes.n then mode:value("11na",
"802.11a+n") end
+
+ htmode = s:taboption("advanced", ListValue, "htmode",
translate("HT mode"))
+ htmode:depends("hwmode", "11na")
+ htmode:depends("hwmode", "11ng")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40-", translate("40MHz 2nd channel below"))
+ htmode:value("HT40+", translate("40MHz 2nd channel above"))
+
+ noscan = s:taboption("advanced", Flag, "noscan",
translate("Force 40MHz mode"),
+ translate("Always use 40MHz channels even if the
secondary channel overlaps. Using this option does not comply with IEEE
802.11n-2009!"))
+ noscan:depends("htmode", "HT40+")
+ noscan:depends("htmode", "HT40-")
+ noscan.default = noscan.disabled
+
+ --htcapab = s:taboption("advanced", DynamicList, "ht_capab",
translate("HT capabilities"))
+ --htcapab:depends("hwmode", "11na")
+ --htcapab:depends("hwmode", "11ng")
+ end
+
+ local cl = iw and iw.countrylist
+ if cl and #cl > 0 then
+ cc = s:taboption("advanced", ListValue, "country",
translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ cc.default = tostring(iw and iw.country or "00")
+ for _, c in ipairs(cl) do
+ cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
+ end
+ else
+ s:taboption("advanced", Value, "country", translate("Country
Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ end
+
+ s:taboption("advanced", Value, "distance", translate("Distance
Optimization"),
+ translate("Distance to farthest network member in meters."))
+
+ -- external antenna profiles
+ local eal = iw and iw.extant
+ if eal and #eal > 0 then
+ ea = s:taboption("advanced", ListValue, "extant",
translate("Antenna Configuration"))
+ for _, eap in ipairs(eal) do
+ ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description
})
+ if eap.selected then
+ ea.default = eap.id
+ end
+ end
+ end
+
+ s:taboption("advanced", Value, "frag", translate("Fragmentation
Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+end
+
+------------------- Madwifi Device ------------------
+
+if hwtype == "atheros" then
+ tp = s:taboption("general",
+ (#tx_power_list > 0) and ListValue or Value,
+ "txpower", translate("Transmit Power"), "dBm")
+
+ tp.rmempty = true
+ tp.default = tx_power_cur
+
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("", translate("auto"))
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+ if hw_modes.g then mode:value("11bg", "802.11b+g") end
+ if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
+ if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
+ mode:value("fh", translate("Frequency Hopping"))
+
+ s:taboption("advanced", Flag, "diversity",
translate("Diversity")).rmempty = false
+
+ if not nsantenna then
+ ant1 = s:taboption("advanced", ListValue, "txantenna",
translate("Transmitter Antenna"))
+ ant1.widget = "radio"
+ ant1.orientation = "horizontal"
+ ant1:depends("diversity", "")
+ ant1:value("0", translate("auto"))
+ ant1:value("1", translate("Antenna 1"))
+ ant1:value("2", translate("Antenna 2"))
+
+ ant2 = s:taboption("advanced", ListValue, "rxantenna",
translate("Receiver Antenna"))
+ ant2.widget = "radio"
+ ant2.orientation = "horizontal"
+ ant2:depends("diversity", "")
+ ant2:value("0", translate("auto"))
+ ant2:value("1", translate("Antenna 1"))
+ ant2:value("2", translate("Antenna 2"))
+
+ else -- NanoFoo
+ local ant = s:taboption("advanced", ListValue, "antenna",
translate("Transmitter Antenna"))
+ ant:value("auto")
+ ant:value("vertical")
+ ant:value("horizontal")
+ ant:value("external")
+ end
+
+ s:taboption("advanced", Value, "distance", translate("Distance
Optimization"),
+ translate("Distance to farthest network member in meters."))
+ s:taboption("advanced", Value, "regdomain", translate("Regulatory
Domain"))
+ s:taboption("advanced", Value, "country", translate("Country Code"))
+ s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
+
+ --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+end
+
+------------------- Marvell Device ------------------
+
+if hwtype == "marvell" then
+-- tp = s:taboption("general",
+-- (#tx_power_list > 0) and ListValue or Value,
+-- "txpower", translate("Transmit Power"), "dBm")
+
+-- tp.rmempty = true
+-- tp.default = tx_power_cur
+
+-- function tp.cfgvalue(...)
+-- return txpower_current(Value.cfgvalue(...), tx_power_list)
+-- end
+
+-- for _, p in ipairs(tx_power_list) do
+-- tp:value(p.driver_dbm, "%i dBm (%i mW)"
+-- %{ p.display_dbm, p.display_mw })
+-- end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("11b", "802.11b")
+ mode:value("11g", "802.11g")
+ mode:value("11bg", "802.11bg")
+ mode:value("11n", "802.11n")
+ mode:value("11gn", "802.11gn")
+ mode:value("11bgn", "802.11bgn")
+ mode:value("11a", "802.11a")
+ mode:value("11an", "802.11an")
+ mode:value("11bgnac", "802.11b/g/n/ac")
+ mode:value("11anac", "802.11a/n/ac")
+
+-- s:taboption("advanced", Flag, "diversity",
translate("Diversity")).rmempty = false
+
+-- if not nsantenna then
+-- ant1 = s:taboption("advanced", ListValue, "txantenna",
translate("Transmitter Antenna"))
+-- ant1.widget = "radio"
+-- ant1.orientation = "horizontal"
+-- ant1:depends("diversity", "")
+-- ant1:value("0", translate("auto"))
+-- ant1:value("1", translate("Antenna 1"))
+-- ant1:value("2", translate("Antenna 2"))
+
+-- ant2 = s:taboption("advanced", ListValue, "rxantenna",
translate("Receiver Antenna"))
+-- ant2.widget = "radio"
+-- ant2.orientation = "horizontal"
+-- ant2:depends("diversity", "")
+-- ant2:value("0", translate("auto"))
+-- ant2:value("1", translate("Antenna 1"))
+-- ant2:value("2", translate("Antenna 2"))
+
+ --else -- NanoFoo
+ --local ant = s:taboption("advanced", ListValue, "antenna",
translate("Transmitter Antenna"))
+ --ant:value("auto")
+ --ant:value("vertical")
+ --ant:value("horizontal")
+ --ant:value("external")
+ --end
+
+-- s:taboption("advanced", Value, "distance", translate("Distance
Optimization"),
+-- translate("Distance to farthest network member in meters."))
+-- s:taboption("advanced", Value, "regdomain", translate("Regulatory
Domain"))
+-- s:taboption("advanced", Value, "country", translate("Country Code"))
+-- s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
+
+ --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+end
+
+------------------- Broadcom Device ------------------
+
+if hwtype == "broadcom" then
+ tp = s:taboption("general",
+ (#tx_power_list > 0) and ListValue or Value,
+ "txpower", translate("Transmit Power"), "dBm")
+
+ tp.rmempty = true
+ tp.default = tx_power_cur
+
+ function tp.cfgvalue(...)
+ return txpower_current(Value.cfgvalue(...), tx_power_list)
+ end
+
+ for _, p in ipairs(tx_power_list) do
+ tp:value(p.driver_dbm, "%i dBm (%i mW)"
+ %{ p.display_dbm, p.display_mw })
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("11bg", "802.11b+g")
+ mode:value("11b", "802.11b")
+ mode:value("11g", "802.11g")
+ mode:value("11gst", "802.11g + Turbo")
+
+ ant1 = s:taboption("advanced", ListValue, "txantenna",
translate("Transmitter Antenna"))
+ ant1.widget = "radio"
+ ant1:depends("diversity", "")
+ ant1:value("3", translate("auto"))
+ ant1:value("0", translate("Antenna 1"))
+ ant1:value("1", translate("Antenna 2"))
+
+ ant2 = s:taboption("advanced", ListValue, "rxantenna",
translate("Receiver Antenna"))
+ ant2.widget = "radio"
+ ant2:depends("diversity", "")
+ ant2:value("3", translate("auto"))
+ ant2:value("0", translate("Antenna 1"))
+ ant2:value("1", translate("Antenna 2"))
+
+ s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
+
+ s:taboption("advanced", Value, "distance", translate("Distance
Optimization"))
+ --s:option(Value, "slottime", translate("Slot time"))
+
+ s:taboption("advanced", Value, "country", translate("Country Code"))
+ s:taboption("advanced", Value, "maxassoc", translate("Connection
Limit"))
+end
+
+
+--------------------- HostAP Device ---------------------
+
+if hwtype == "prism2" then
+ s:taboption("advanced", Value, "txpower", translate("Transmit Power"),
"att units").rmempty = true
+
+ s:taboption("advanced", Flag, "diversity",
translate("Diversity")).rmempty = false
+
+ s:taboption("advanced", Value, "txantenna", translate("Transmitter
Antenna"))
+ s:taboption("advanced", Value, "rxantenna", translate("Receiver
Antenna"))
+end
+
+
+----------------------- Interface -----------------------
+
+s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface
Configuration"))
+ifsection = s
+s.addremove = false
+s.anonymous = true
+s.defaults.device = wdev:name()
+
+s:tab("general", translate("General Setup"))
+s:tab("encryption", translate("Wireless Security"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
+
+s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended
Service Set Identifier\">ESSID</abbr>"))
+
+mode = s:taboption("general", ListValue, "mode", translate("Mode"))
+mode.override_values = true
+mode:value("ap", translate("Access Point"))
+--mode:value("sta", translate("Client"))
+--mode:value("adhoc", translate("Ad-Hoc"))
+
+bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic
Service Set Identifier\">BSSID</abbr>"))
+
+network = s:taboption("general", Value, "network", translate("Network"),
+ translate("Choose the network(s) you want to attach to this wireless
interface or " ..
+ "fill out the <em>create</em> field to define a new network."))
+
+network.rmempty = true
+network.template = "cbi/network_netlist"
+network.widget = "checkbox"
+network.novirtual = true
+
+function network.write(self, section, value)
+ local i = nw:get_interface(section)
+ if i then
+ if value == '-' then
+ value = m:formvalue(self:cbid(section) .. ".newnet")
+ if value and #value > 0 then
+ local n = nw:add_network(value, {proto="none"})
+ if n then n:add_interface(i) end
+ else
+ local n = i:get_network()
+ if n then n:del_interface(i) end
+ end
+ else
+ local v
+ for _, v in ipairs(i:get_networks()) do
+ v:del_interface(i)
+ end
+ for v in ut.imatch(value) do
+ local n = nw:get_network(v)
+ if n then
+ if not n:is_empty() then
+ n:set("type", "bridge")
+ end
+ n:add_interface(i)
+ end
+ end
+ end
+ end
+end
+
+-------------------- MAC80211 Interface ----------------------
+
+if hwtype == "mac80211" then
+ if fs.access("/usr/sbin/iw") then
+ mode:value("mesh", "802.11s")
+ end
+
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="sta"})
+ bssid:depends({mode="sta-wds"})
+
+ mp = s:taboption("macfilter", ListValue, "macfilter",
translate("MAC-Address Filter"))
+ mp:depends({mode="ap"})
+ mp:depends({mode="ap-wds"})
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+
+ ml = s:taboption("macfilter", DynamicList, "maclist",
translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macfilter="allow"})
+ ml:depends({macfilter="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name
}) end)
+
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"),
translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"),
translate("WDS")})
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
+ end
+ end
+
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
+
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
+ end
+ end
+
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr
title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="ap-wds"})
+
+ wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
+ wmm:depends({mode="ap"})
+ wmm:depends({mode="ap-wds"})
+ wmm.default = wmm.enabled
+end
+
+-------------------- Marvell Interface ----------------------
+
+if hwtype == "marvell" then
+ --mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ --mode:value("monitor", translate("Monitor"))
+ --mode:value("ap-wds", "%s (%s)" % {translate("Access Point"),
translate("WDS")})
+ --mode:value("sta-wds", "%s (%s)" % {translate("Client"),
translate("WDS")})
+ --mode:value("wds", translate("Static WDS"))
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
+ end
+ end
+
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
+
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
+ end
+ end
+
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
+
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate
WDS"))
+ wdssep:depends({mode="ap-wds"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr
title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="ap-wds"})
+ hidden:depends({mode="sta-wds"})
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate
Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy",
translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+
+ ml = s:taboption("macfilter", DynamicList, "maclist",
translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name
}) end)
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast
Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation
Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+ local swm = s:taboption("advanced", Flag, "sw_merge",
translate("Disable HW-Beacon timer"))
+ swm:depends({mode="adhoc"})
+
+ local nos = s:taboption("advanced", Flag, "nosbeacon",
translate("Disable HW-Beacon timer"))
+ nos:depends({mode="sta"})
+ nos:depends({mode="sta-wds"})
+
+ local probereq = s:taboption("advanced", Flag, "probereq",
translate("Do not send probe responses"))
+ probereq.enabled = "0"
+ probereq.disabled = "1"
+end
+
+-------------------- Madwifi Interface ----------------------
+
+if hwtype == "atheros" then
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"),
translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"),
translate("WDS")})
+ mode:value("wds", translate("Static WDS"))
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
+ end
+ end
+
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
+
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
+ end
+ end
+
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
+
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate
WDS"))
+ wdssep:depends({mode="ap-wds"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr
title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="ap-wds"})
+ hidden:depends({mode="sta-wds"})
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate
Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy",
translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+
+ ml = s:taboption("macfilter", DynamicList, "maclist",
translate("MAC-List"))
+ ml.datatype = "macaddr"
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name
}) end)
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast
Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation
Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+ local swm = s:taboption("advanced", Flag, "sw_merge",
translate("Disable HW-Beacon timer"))
+ swm:depends({mode="adhoc"})
+
+ local nos = s:taboption("advanced", Flag, "nosbeacon",
translate("Disable HW-Beacon timer"))
+ nos:depends({mode="sta"})
+ nos:depends({mode="sta-wds"})
+
+ local probereq = s:taboption("advanced", Flag, "probereq",
translate("Do not send probe responses"))
+ probereq.enabled = "0"
+ probereq.disabled = "1"
+end
+
+
+-------------------- Broadcom Interface ----------------------
+
+if hwtype == "broadcom" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
+
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr
title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
+
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate
Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+
+ bssid:depends({mode="wds"})
+ bssid:depends({mode="adhoc"})
+end
+
+
+----------------------- HostAP Interface ---------------------
+
+if hwtype == "prism2" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
+
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr
title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
+
+ bssid:depends({mode="sta"})
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy",
translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist",
translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name
}) end)
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation
Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+end
+
+
+------------------- WiFI-Encryption -------------------
+
+encr = s:taboption("encryption", ListValue, "encryption",
translate("Encryption"))
+encr.override_values = true
+encr.override_depends = true
+encr:depends({mode="ap"})
+encr:depends({mode="sta"})
+encr:depends({mode="adhoc"})
+encr:depends({mode="ahdemo"})
+encr:depends({mode="ap-wds"})
+encr:depends({mode="sta-wds"})
+encr:depends({mode="mesh"})
+
+cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
+cipher:depends({encryption="wpa"})
+cipher:depends({encryption="wpa2"})
+cipher:depends({encryption="psk"})
+cipher:depends({encryption="psk2"})
+cipher:depends({encryption="wpa-mixed"})
+cipher:depends({encryption="psk-mixed"})
+cipher:value("auto", translate("auto"))
+cipher:value("ccmp", translate("Force CCMP (AES)"))
+cipher:value("tkip", translate("Force TKIP"))
+cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
+
+function encr.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(self, section))
+ if v == "wep" then
+ return "wep-open"
+ elseif v and v:match("%+") then
+ return (v:gsub("%+.+$", ""))
+ end
+ return v
+end
+
+function encr.write(self, section, value)
+ local e = tostring(encr:formvalue(section))
+ local c = tostring(cipher:formvalue(section))
+ if value == "wpa" or value == "wpa2" then
+ self.map.uci:delete("wireless", section, "key")
+ end
+ if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
+ e = e .. "+" .. c
+ end
+ self.map:set(section, "encryption", e)
+end
+
+function cipher.cfgvalue(self, section)
+ local v = tostring(ListValue.cfgvalue(encr, section))
+ if v and v:match("%+") then
+ v = v:gsub("^[^%+]+%+", "")
+ if v == "aes" then v = "ccmp"
+ elseif v == "tkip+aes" then v = "tkip+ccmp"
+ elseif v == "aes+tkip" then v = "tkip+ccmp"
+ elseif v == "ccmp+tkip" then v = "tkip+ccmp"
+ end
+ end
+ return v
+end
+
+function cipher.write(self, section)
+ return encr:write(section)
+end
+
+
+encr:value("none", "No Encryption")
+encr:value("wep-open", translate("WEP Open System"), {mode="ap"},
{mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"},
{mode="ahdemo"}, {mode="wds"})
+encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"},
{mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"},
{mode="ahdemo"}, {mode="wds"})
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" or hwtype
== "marvell" then
+ local supplicant = fs.access("/usr/sbin/wpa_supplicant")
+ local hostapd = fs.access("/usr/sbin/hostapd")
+
+ -- Probe EAP support
+ local has_ap_eap = (os.execute("hostapd -veap >/dev/null 2>/dev/null")
== 0)
+ local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null
2>/dev/null") == 0)
+
+ if hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"},
{mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"},
{mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode",
{mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ if has_ap_eap and has_sta_eap then
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"},
{mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"},
{mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ end
+ elseif hostapd and not supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode",
{mode="ap"}, {mode="ap-wds"})
+ if has_ap_eap then
+ encr:value("wpa", "WPA-EAP", {mode="ap"},
{mode="ap-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"},
{mode="ap-wds"})
+ end
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client
mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ elseif not hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode",
{mode="sta"}, {mode="sta-wds"})
+ if has_sta_eap then
+ encr:value("wpa", "WPA-EAP", {mode="sta"},
{mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="sta"},
{mode="sta-wds"})
+ end
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client
mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ else
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client
mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ end
+elseif hwtype == "broadcom" then
+ encr:value("psk", "WPA-PSK")
+ encr:value("psk2", "WPA2-PSK")
+ encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+end
+
+auth_server = s:taboption("encryption", Value, "auth_server",
translate("Radius-Authentication-Server"))
+auth_server:depends({mode="ap", encryption="wpa"})
+auth_server:depends({mode="ap", encryption="wpa2"})
+auth_server:depends({mode="ap-wds", encryption="wpa"})
+auth_server:depends({mode="ap-wds", encryption="wpa2"})
+auth_server.rmempty = true
+auth_server.datatype = "host"
+
+auth_port = s:taboption("encryption", Value, "auth_port",
translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
+auth_port:depends({mode="ap", encryption="wpa"})
+auth_port:depends({mode="ap", encryption="wpa2"})
+auth_port:depends({mode="ap-wds", encryption="wpa"})
+auth_port:depends({mode="ap-wds", encryption="wpa2"})
+auth_port.rmempty = true
+auth_port.datatype = "port"
+
+auth_secret = s:taboption("encryption", Value, "auth_secret",
translate("Radius-Authentication-Secret"))
+auth_secret:depends({mode="ap", encryption="wpa"})
+auth_secret:depends({mode="ap", encryption="wpa2"})
+auth_secret:depends({mode="ap-wds", encryption="wpa"})
+auth_secret:depends({mode="ap-wds", encryption="wpa2"})
+auth_secret.rmempty = true
+auth_secret.password = true
+
+acct_server = s:taboption("encryption", Value, "acct_server",
translate("Radius-Accounting-Server"))
+acct_server:depends({mode="ap", encryption="wpa"})
+acct_server:depends({mode="ap", encryption="wpa2"})
+acct_server:depends({mode="ap-wds", encryption="wpa"})
+acct_server:depends({mode="ap-wds", encryption="wpa2"})
+acct_server.rmempty = true
+acct_server.datatype = "host"
+
+acct_port = s:taboption("encryption", Value, "acct_port",
translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
+acct_port:depends({mode="ap", encryption="wpa"})
+acct_port:depends({mode="ap", encryption="wpa2"})
+acct_port:depends({mode="ap-wds", encryption="wpa"})
+acct_port:depends({mode="ap-wds", encryption="wpa2"})
+acct_port.rmempty = true
+acct_port.datatype = "port"
+
+acct_secret = s:taboption("encryption", Value, "acct_secret",
translate("Radius-Accounting-Secret"))
+acct_secret:depends({mode="ap", encryption="wpa"})
+acct_secret:depends({mode="ap", encryption="wpa2"})
+acct_secret:depends({mode="ap-wds", encryption="wpa"})
+acct_secret:depends({mode="ap-wds", encryption="wpa2"})
+acct_secret.rmempty = true
+acct_secret.password = true
+
+wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
+wpakey:depends("encryption", "psk")
+wpakey:depends("encryption", "psk2")
+wpakey:depends("encryption", "psk+psk2")
+wpakey:depends("encryption", "psk-mixed")
+wpakey.datatype = "wpakey"
+wpakey.rmempty = true
+wpakey.password = true
+
+wpakey.cfgvalue = function(self, section, value)
+ local key = m.uci:get("wireless", section, "key")
+ if key == "1" or key == "2" or key == "3" or key == "4" then
+ return nil
+ end
+ return key
+end
+
+wpakey.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+ self.map.uci:delete("wireless", section, "key1")
+end
+
+
+wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key
Slot"))
+wepslot:depends("encryption", "wep-open")
+wepslot:depends("encryption", "wep-shared")
+wepslot:value("1", translatef("Key #%d", 1))
+wepslot:value("2", translatef("Key #%d", 2))
+wepslot:value("3", translatef("Key #%d", 3))
+wepslot:value("4", translatef("Key #%d", 4))
+
+wepslot.cfgvalue = function(self, section)
+ local slot = tonumber(m.uci:get("wireless", section, "key"))
+ if not slot or slot < 1 or slot > 4 then
+ return 1
+ end
+ return slot
+end
+
+wepslot.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+end
+
+local slot
+for slot=1,4 do
+ wepkey = s:taboption("encryption", Value, "key" .. slot,
translatef("Key #%d", slot))
+ wepkey:depends("encryption", "wep-open")
+ wepkey:depends("encryption", "wep-shared")
+ wepkey.datatype = "wepkey"
+ wepkey.rmempty = true
+ wepkey.password = true
+
+ function wepkey.write(self, section, value)
+ if value and (#value == 5 or #value == 13) then
+ value = "s:" .. value
+ end
+ return Value.write(self, section, value)
+ end
+end
+
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+ nasid:depends({mode="ap", encryption="wpa"})
+ nasid:depends({mode="ap", encryption="wpa2"})
+ nasid:depends({mode="ap-wds", encryption="wpa"})
+ nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid.rmempty = true
+
+ eaptype = s:taboption("encryption", ListValue, "eap_type",
translate("EAP-Method"))
+ eaptype:value("tls", "TLS")
+ eaptype:value("ttls", "TTLS")
+ eaptype:value("peap", "PEAP")
+ eaptype:depends({mode="sta", encryption="wpa"})
+ eaptype:depends({mode="sta", encryption="wpa2"})
+ eaptype:depends({mode="sta-wds", encryption="wpa"})
+ eaptype:depends({mode="sta-wds", encryption="wpa2"})
+
+ cacert = s:taboption("encryption", FileUpload, "ca_cert",
translate("Path to CA-Certificate"))
+ cacert:depends({mode="sta", encryption="wpa"})
+ cacert:depends({mode="sta", encryption="wpa2"})
+ cacert:depends({mode="sta-wds", encryption="wpa"})
+ cacert:depends({mode="sta-wds", encryption="wpa2"})
+
+ clientcert = s:taboption("encryption", FileUpload, "client_cert",
translate("Path to Client-Certificate"))
+ clientcert:depends({mode="sta", encryption="wpa"})
+ clientcert:depends({mode="sta", encryption="wpa2"})
+ clientcert:depends({mode="sta-wds", encryption="wpa"})
+ clientcert:depends({mode="sta-wds", encryption="wpa2"})
+
+ privkey = s:taboption("encryption", FileUpload, "priv_key",
translate("Path to Private Key"))
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+
+ privkeypwd = s:taboption("encryption", Value, "priv_key_pwd",
translate("Password of Private Key"))
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+
+
+ auth = s:taboption("encryption", Value, "auth",
translate("Authentication"))
+ auth:value("PAP")
+ auth:value("CHAP")
+ auth:value("MSCHAP")
+ auth:value("MSCHAPV2")
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+
+
+ identity = s:taboption("encryption", Value, "identity",
translate("Identity"))
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+
+ password = s:taboption("encryption", Value, "password",
translate("Password"))
+ password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+end
+
+return m
--
1.7.9.5
__________________________________________________________________ Confidential
This e-mail and any files transmitted with it are the property of Belkin
International, Inc. and/or its affiliates, are confidential, and are intended
solely for the use of the individual or entity to whom this e-mail is
addressed. If you are not one of the named recipients or otherwise have reason
to believe that you have received this e-mail in error, please notify the
sender and delete this message immediately from your computer. Any other use,
retention, dissemination, forwarding, printing or copying of this e-mail is
strictly prohibited. Pour la version française:
http://www.belkin.com/email-notice/French.html Für die deutsche Übersetzung:
http://www.belkin.com/email-notice/German.html
__________________________________________________________________
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
