On Fri, Feb 7, 2014 at 11:23 PM, Marco Antonio Mauro <marcu...@gmail.com> wrote: > This patch adds factory image building for the DGN3500, all variants, > and fixes sysupgrade images to make them play nice with the sercomm > secondary boot loader. > > The factory images can be used directly in the update dialog in the > interface of the stock firmware and via the special Sercomm bootmode > and a special windows flashing utility (allegedly present in the CD > that came with the device -- but it's also compatible with the NSLU2 > Upgrade_207_XP utility.) The special bootmode can be activated by > turning the device on while holding the reset button pressed, then > releasing it when the power led starts blinking red and green. Please > notice that if using the 207 utility, it will always report that the > flashing failed even though it completed successfully. Just power > cycle the router manually after the utility reports the failure and > OpenWRT will boot. This same utility (despite reporting failure in > this case too) can revert a DGN3500 (any variant) to the appropriate > stock Netgear firmware. > > This patch is a heavily modified version of a package I found on the > OpenWRT forum with a couple fixes and features added -- mainly the > generation of all the different image variants to support all known > models directly, atm known variants are AnnexA-WW, AnnexA-NA and > AnnexB-DE/GR. > > I tested the patch successfully on my device. > > Signed-off-by: Marco Antonio Mauro <marcu...@gmail.com>
Can somebody apply this? Thanks! -- Marcus905 GPG pubkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x1FC0ECC932FE5FAC _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
