On 21 April 2014 12:55, John Crispin <j...@phrozen.org> wrote: > > > On 21/04/2014 10:58, Roman Yeryomin wrote: >> The target was ramips, rt2880 and rt305x subtargets at least. I'm >> not sure how rtl8366xx differs from ip175e but both realtek switch >> and smi parts are under drivers/net/phy/. I remember when I >> submitted a patch to exclude realtek switch from target kernel >> konfig and just use kernel package when it's needed by a board, >> somebody said it will not work like this. But it did and works now >> also. Unfortunately I don't have any hw with ip175e to test... > > i believe you are wrong here but i will verify. to my understanding > only smi phy drivers should work when loaded post ethernet init. > > the etehrnet driver needs the phy driver to be present when the > of_phy_connect() is called. to my knowledge there is no mechanism for > defeered phy attach logic. > > John
grep -Hrin "rtl83" target/linux/ramips/*/config-3.10 target/linux/ramips/rt3883/config-3.10:140:CONFIG_RTL8366_SMI=y target/linux/ramips/rt3883/config-3.10:141:CONFIG_RTL8367B_PHY=y target/linux/ramips/rt3883/config-3.10:142:CONFIG_RTL8367_PHY=y But I never touched rt3883 subtarget and I assume those lines can be safely deleted (after including kmod-rtl836xxx package in board profiles). Regards, Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
