>look this topic https://forum.openwrt.org/viewtopic.php?id=48907 and
>https://forum.openwrt.org/viewtopic.php?id=48892
>looks like ath_register_eth(1) not selected, so device detect only one wan
>port
Yes, it only call ath_register_eth(0). so device detect only one wan port.
But I can modify network config to use this port as lan or wan port.
I want to know what happend after we restart network.
2014-02-18 0:23 GMT+02:00 camden lindsay <camden.lindsay+open...@gmail.com>:
> It sounds like you have to re-configure the switch, to have the port
> that is currently 'wan' on the same vlan as the LAN.
>
> see http://wiki.openwrt.org/doc/uci/network/switch
>
> On Mon, Feb 17, 2014 at 2:04 PM, jonsm...@gmail.com <jonsm...@gmail.com>
> wrote:
> > On Mon, Feb 17, 2014 at 4:48 PM, Hartmut Knaack <knaac...@gmx.de> wrote:
> >> jonsm...@gmail.com schrieb:
> >>> The switch (esw) configuration separates the LAN and WAN ports.
> >> But according to the wiki, the 703n has only one ethernet port and no
> switch.
> >
> > AR9331 has the switch on chip.
> > http://www.eeboard.com/wp-content/uploads/downloads/2013/08/AR9331.pdf
> >
> >
> >>>
> >>> On Mon, Feb 17, 2014 at 4:07 PM, Hartmut Knaack <knaac...@gmx.de>
> wrote:
> >>>> bjzhougong schrieb:
> >>>>> Dear Sirs.
> >>>>>
> >>>>>>> As we know, we can configure "network.lan.interface" or
> "network.wan.interface" as eth0 to use ethernet port as lan or wan port on
> WR703N.
> >>>>>>> I think it should need to do anything in driver for switch
> ethernet port,
> >>>>>>> and I want to know what happened between user space and kernel
> space after we run "/etc/init.d/network restart",
> >>>>>>> Thanks for any idea about this!
> >>>>> If there is any help? Thanks!
> >>>> Not sure, what exactly you want to know. When running
> "/etc/init.d/network restart", all the configured options in
> /etc/config/network get configured. See
> http://wiki.openwrt.org/doc/uci/network for more information about
> available options.
> >>>> When changing a certain network device from WAN to LAN, it is mainly
> about switching the configuration from being DHCP master or slave, and some
> routing configurations.
> >>>>>
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> >>>>> bjzhougong
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> openwrt-devel mailing list
> >>>>> openwrt-devel@lists.openwrt.org
> >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >>>> _______________________________________________
> >>>> openwrt-devel mailing list
> >>>> openwrt-devel@lists.openwrt.org
> >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >>>
> >>>
> >> _______________________________________________
> >> openwrt-devel mailing list
> >> openwrt-devel@lists.openwrt.org
> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >
> >
> >
> > --
> > Jon Smirl
> > jonsm...@gmail.com
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel@lists.openwrt.org
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20140218/3c7c9ceb/attachment.html>
------------------------------
Subject: Digest Footer
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
------------------------------
End of openwrt-devel Digest, Vol 98, Issue 62
*********************************************
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
