Confirmed working on the WD MyNet N750. Now the device is no longer "deaf".
This device broadcast stronger WiFi than any of my other routers. Kudos to Felix for adding support for this device. On Wed, Jan 8, 2014 at 12:42 AM, Steven Haigh <net...@crc.id.au> wrote: > On 8/01/2014 2:44 PM, Weedy wrote: > > > > On 7 Jan 2014 21:30, "Steven Haigh" <net...@crc.id.au > > <mailto:net...@crc.id.au>> wrote: > >> > >> On 8/01/2014 9:20 AM, Felix Kaechele wrote: > >> > The LNAs need to be enabled by setting their respective GPIO to high > > even > >> > though the original firmware's setting sets them to low on > > initialization. > >> > > >> > Obviously the LNAs are then later initialized by the driver on the OEM > >> > firmware. Without this fix the device is mostly "deaf". > >> > > >> > Signed-off-by: Felix Kaechele <hef...@fedoraproject.org > > <mailto:hef...@fedoraproject.org>> > >> > --- > >> > target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c | 4 ++-- > >> > 1 file changed, 2 insertions(+), 2 deletions(-) > >> > > >> > diff --git > > a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c > > b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c > >> > index a44a7e0..737bec2 100644 > >> > --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c > >> > +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c > >> > @@ -179,10 +179,10 @@ static void __init mynet_n750_setup(void) > >> > * board/ar7240/db12x/alpha_gpio.c > >> > */ > >> > gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA0, > >> > - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, > >> > + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, > >> > "External LNA0"); > >> > gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA1, > >> > - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, > >> > + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, > >> > "External LNA1"); > >> > > >> > mynet_n750_get_mac("wlan24mac=", tmpmac); > >> > > >> > >> Out of interest, would this also apply to the N600? I have this device > >> and I've always thought it was 'deaf' as well.... > > > > The patch is two lines. Try it and tell us. > > Well, I actually noticed that in the n600 [PATCH 1/2] has this already - > I've applied PATCH 1/2 and building now... Will advise. > > -- > Steven Haigh > > Email: net...@crc.id.au > Web: https://www.crc.id.au > Phone: (03) 9001 6090 - 0412 935 897 > Fax: (03) 8338 0299 > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
