Argus ATP52B: ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645: seems to be a redundant case
Signed-off-by: Roman Yeryomin <ro...@advem.lv>
---
.../linux/ramips/base-files/etc/uci-defaults/02_network | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network
b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 79ad4b8..63458ed 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -56,7 +56,6 @@ ramips_setup_interfaces()
;;
3g-6200n | \
- argus-atp52b | \
b2c | \
nw718 | \
psr-680w | \
@@ -72,13 +71,6 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
;;
- dir-645)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
- ucidef_add_switch_vlan "switch0" "2" "0 6t"
- ;;
-
dir-610-a1 | \
dir-300-b7 | \
dir-320-b1 | \
@@ -90,6 +82,8 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "4 6t"
;;
+ argus-atp52b | \
+ dir-645 | \
f5d8235-v1 | \
f5d8235-v2 | \
hg255d | \
@@ -136,7 +130,10 @@ ramips_setup_interfaces()
;;
wcr-150gn)
- ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 6t"
+ ucidef_add_switch_vlan "switch0" "2" "6t"
;;
d105 | \
--
1.8.3.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
