On 11/13/2013 12:44 PM, Russell Senior wrote: > > I tried building/running recent trunk for the venerable Netgear > WGT634U, and discovered that it doesn't boot, or at least I lose the > console right away. The last thing I see on the screen is: > > CFE version 1.0.34 for BCM95365R (32bit,SP,LE) > Build Date: Tue Feb 24 03:21:41 CST 2004 (root@jackylinux) > Copyright (C) 2000,2001,2002 Broadcom Corporation. > > Add MAC client version(DNI). > Initializing Arena. > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller > CPU type 0x29007: 200MHz > Total memory: 0x2000000 bytes (32MB) > > Total memory used by CFE: 0x81BB1280 - 0x82000000 (4517248) > Initialized Data: 0x81BB1280 - 0x81BB3E90 (11280) > BSS Area: 0x81BB3E90 - 0x81BB45D0 (1856) > Local Heap: 0x81BB45D0 - 0x81FB45D0 (4194304) > Stack Area: 0x81FB45D0 - 0x81FB65D0 (8192) > Text (code) segment: 0x81FB65E0 - 0x81FFFFB0 (301520) > Boot area (physical): 0x01B70000 - 0x01BB0000 > Relocation Factor: I:E23B65E0 - D:01BB0280 > > configure vlans > ***************************************************************** > *********************** VLAN Driver initial ******************** > ***************************************************************** > Process LAN port(2-5) vlan Architecture... > SUCCESS: trying to create VLAN 0 for switch > SUCCESS: trying to add LAN port > > Process WAN port(2-5) vlan Architecture... > SUCCESS: trying to create VLAN 0 for switch > SUCCESS: trying to add WAN port > SUCCESS: enable ports success > configure vlans...done > Device eth0: hwaddr 00-0F-B5-3D-5B-58, ipaddr 192.168.1.1, mask > 255.255.255.0 > gateway not set, nameserver not set > Loader:elf Filesys:raw Dev:flash0.os File: Options:(null) > *************************** > **** MAC Client V1.0 **** > *************************** > et0macaddr value :flag =0 value=00-0f-b5-3d-5b-58 > et1macaddr value :flag =0 value=00-0f-b5-3d-5b-59 > MAC exist at least one > system ethernet mac exist and not default.... > Skip mac client process..... > Loading: 0x80000000/8188 Entry at 0x80001000 > Closing network. > et0: link down > Starting program at 0x80001000 > > and then it hangs indefinitely. I bisected this, with a vanilla > configuration, distclean'ing in between each build. These are the > results: > > r38308 boots, > r38309 doesn't build, > r38310 builds but doesn't boot on wgt634u > > where "doesn't boot" means the console hang after "Starting program at ..." > > Testing earlier versions, where it does boot, I find that with the > default network configuration I cannot (from a serial console) ping > hosts on the test device's local network, with the exception of the > default gateway, but I can ping devices off the local network > (e.g. 4.2.2.2). If I remove the switch configuration from > /etc/config/network, I get a plain eth0 interface, which gets a DHCP > lease and can ping local and non-local hosts. > > I have a box of these devices, and therefore enthusiastic about > getting OpenWrt working with them again. I will be happy to work to > help fix the problem. > > Let me know if I left out any pertinent details. I'll be around on > the IRC channel during waking hours US West Coast time. > > Thanks!
Thanks for reporting the problem. The Fixes are now committed in r38793 and r38794. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
