This was observed on the Belkin Share F7D7302.
Signed-off-by: Cody P Schafer <de...@codyps.com>
---
target/linux/brcm47xx/base-files/etc/init.d/netconfig | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
index 1bf9487..d0ce9d3 100755
--- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -93,12 +93,14 @@ start() {
END {
if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) &&
(nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) &&
(nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) {
+ ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) &&
(nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8"))) || \
+ ((nvram["vlan2ports"] ~ /^0 1 2 3 8/ ) &&
(nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8")))) {
c["vlan1ports"] = "0 1 2 3 8t"
c["vlan2ports"] = "4 8t"
}
if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) &&
(nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \
- ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) &&
(nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) {
+ ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) &&
(nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5"))) || \
+ ((nvram["vlan2ports"] ~ /^0 1 2 3 5/ ) &&
(nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5")))) {
c["vlan1ports"] = "0 1 2 3 5t"
c["vlan2ports"] = "4 5t"
}
--
1.8.4.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
