The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.
Signed-off-by: Richard Mortimer <ri...@oldelvet.org.uk>
---
target/linux/lantiq/base-files/etc/uci-defaults/02_network | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 2cf16f3..86a47b4 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -65,8 +65,9 @@ ARV4519PW|ARV7518PW|ARV752DPW22)
;;
WBMR)
- ucidef_add_switch "eth0" "1" "0"
- ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
+ ucidef_set_interface_lan "eth0.1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
;;
VG3503J)
--
1.8.1.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
