On 22/10/2013 17:00, Gabor Juhos wrote:
2013.10.20. 19:36 keltezéssel, Flávio Silveira írta:
Any news on this?
-------- Original Message --------
Subject: Ramips Seama sysupgrade image
Date: Mon, 7 Oct 2013 13:23:54 -0300
From: Flávio Silveira <f...@terra.com.br>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Good afternoon,
I have a question about sysupgrade image for Ramips routers that uses
Seama.
Shouldn't sysupgrade image contain the same magic as factory image?
Currently generated sysupgrade image for my router (D-Link DIR-610 A1)
doesn't have it, causing sysupgrade to reject the image.
The sysupgrade image should contain a seama header, otherwise the bootloader
will not load the kernel. I'm confident that it was working on the DIR-645 when
I have added support for that.
It seems that the Seama image generation is broken in trunk since r36169. Not
only the sysupgrade images are broken but the factory images as well.
-Gabor
The factory images are ok, at least for my DIR-610, but sysupgrade
doesn't seem to contain seama header, are you working on this?
Let me know if you want me to test anything
Best regards,
Flavio
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
