On 2013-10-12 6:35 PM, Bastian Bittorf wrote: > * Ben West <b...@gowasabi.net> [12.10.2013 18:27]: >> On a small test network comprised of three atheros nodes, which I use for >> proving out new firmware, I noticed that AA r38346 demonstrates >> dramatically worse throughput between nodes than the same firmware compiled >> from r36669, with the nodes at identical locations / spacings. > > i noticed the some for me. here are only Ubiquiti Bullet M5 / ar71xx > involved, adhoc but longshots (1 neigh). Interesting also: before i used HT40+ > and this is not possible anymore, _nearly_ no packet arrives on the > other side (HT20 is the same), i had to go down to 5 mhz channels now. > > Change was from: r32582 -> r38043 > > the log is now full with 'ath: phy0: Failed to stop TX DMA' > (8000 lines in 14 hours). i will update on newest trunk monday. By the way, I also made a backport of the mac80211 package (+ hostapd) from trunk to AA: http://nbd.name/gitweb.cgi?p=aa-mac80211.git;a=summary git://nbd.name/aa-mac80211.git You can copy those into your AA build tree (after removing the old packages).
Please run a test with those packages, I'm considering a backport from trunk to AA due to recent reports of significant stability improvements. - Felix _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
