Send openwrt-devel mailing list submissions to
openwrt-devel@lists.openwrt.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
or, via email, send a message with subject or body 'help' to
openwrt-devel-requ...@lists.openwrt.org
You can reach the person managing the list at
openwrt-devel-ow...@lists.openwrt.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of openwrt-devel digest..."
Today's Topics:
1. Re: AsiaRF build, no images output (jonsm...@gmail.com)
2. [PATCH] package/index: fix index creating when building
without signing (Alexander Couzens)
3. Re: [PATCH] package/index: fix index creating when building
without signing (Steven Barth)
4. Re: AsiaRF build, no images output (Shawn Lewis)
5. Re: AsiaRF build, no images output (jonsm...@gmail.com)
6. Re: AsiaRF build, no images output (Shawn Lewis)
----------------------------------------------------------------------
Message: 1
Date: Wed, 2 Oct 2013 08:30:27 -0400
From: "jonsm...@gmail.com" <jonsm...@gmail.com>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: [OpenWrt-Devel] AsiaRF build, no images output
Message-ID:
<cakon4oycmknacabmn4c_jds46ya95jqp7ytq5hpjxkhjpjr...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Wed, Oct 2, 2013 at 8:24 AM, jonsm...@gmail.com <jonsm...@gmail.com>
wrote:
There are several things broken on the AsiaRF build.
1) The build system has broken for things with hyphens in the name
2) The rt5350 ethernet switch will not function unless VLAN tagging is
turned on.
I looked at the switch problem for quite a while and can't figure out
what is going on.
Thread on the issue...
http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/20384
This patch will get it going again.
--
Jon Smirl
jonsm...@gmail.com
------------------------------
Message: 2
Date: Wed, 2 Oct 2013 18:36:04 +0200
From: Alexander Couzens <lyn...@fe80.eu>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: [OpenWrt-Devel] [PATCH] package/index: fix index creating
when building without signing
Message-ID: <20131002183604.27c92...@lazus.lan>
Content-Type: text/plain; charset=US-ASCII
Signed-off-by: Alexander Couzens <lyn...@fe80.eu>
---
package/Makefile | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/package/Makefile b/package/Makefile
index bac7001..f82654c 100644
--- a/package/Makefile
+++ b/package/Makefile
@@ -130,16 +130,16 @@ ifndef CONFIG_OPKGSMIME_PASSPHRASE
endif
$(curdir)/index: FORCE
+ @echo Generating package index...
+ @(cd $(PACKAGE_DIR); \
+ $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages && \
+ gzip -9c Packages > Packages.gz )
ifeq ($(call qstrip,$(CONFIG_OPKGSMIME_KEY)),)
@echo Signing key has not been configured
else
ifeq ($(call qstrip,$(CONFIG_OPKGSMIME_CERT)),)
@echo Certificate has not been configured
else
- @echo Generating package index...
- @(cd $(PACKAGE_DIR); \
- $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages && \
- gzip -9c Packages > Packages.gz )
@echo Signing package index...
@(cd $(PACKAGE_DIR); \
openssl smime -binary -in Packages.gz \
--
1.8.4
------------------------------
Message: 3
Date: Wed, 02 Oct 2013 18:40:02 +0200
From: Steven Barth <cy...@openwrt.org>
To: openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH] package/index: fix index creating
when building without signing
Message-ID: <524c4c62.1050...@openwrt.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Sorry about the fuzz and thanks for the patch.
Applied in r38287.
------------------------------
Message: 4
Date: Wed, 2 Oct 2013 12:05:19 -0700
From: Shawn Lewis <shle...@gmail.com>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: [OpenWrt-Devel] AsiaRF build, no images output
Message-ID:
<CAMR0Sc-=jb7gwqdgqgxtrmacq7wetw0kjwb1+51cfrtz-dg...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Progress, thanks! I now have the sysupgrade image, but no factory image. I
noticed that factory images aren't generated for a few of the other ramips
boards as well.
On Wed, Oct 2, 2013 at 5:24 AM, jonsm...@gmail.com
<jonsm...@gmail.com>wrote:
There are several things broken on the AsiaRF build.
1) The build system has broken for things with hyphens in the name
2) The rt5350 ethernet switch will not function unless VLAN tagging is
turned on.
This patch will get it going again.
On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin
<michel.stem...@wanadoo.fr> wrote:
> I had a similar issue with another board: it looks like the OpenWrt
> build
> system doesn't like board names containing a dash sign ("-"), try
renaming
> it.
>
> Le 2 oct. 2013 ? 03:30, Shawn Lewis <shle...@gmail.com> a ?crit :
>
> I'm not getting factory/sysupgrade images for the ramips asiarf target.
>
> If I build the default target profile I get all the other ramips
> images.
If
> I manually select "Asiarf AWM002-EVB" I get vmlinux and other
> precursors
to
> the actual image, but no flashable factory/sysupgrade images.
>
> Tried from trunk as of yesterday evening PST:
>
> svn://svn.openwrt.org/openwrt/trunk@38267
>
> and
>
> svn://svn.openwrt.org/openwrt/trunk@37561
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20131002/df30a24c/attachment-0001.html>
------------------------------
Message: 5
Date: Wed, 2 Oct 2013 15:09:37 -0400
From: "jonsm...@gmail.com" <jonsm...@gmail.com>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: [OpenWrt-Devel] AsiaRF build, no images output
Message-ID:
<CAKON4Oz9P2xshiJasvqCfNHyFb=ggxdjnuf1hkuh5kug5ku...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Wed, Oct 2, 2013 at 3:05 PM, Shawn Lewis <shle...@gmail.com> wrote:
Progress, thanks! I now have the sysupgrade image, but no factory image.
I
noticed that factory images aren't generated for a few of the other
ramips
boards as well.
Just start the board with the UART connected and pick update the
system image (choice 2 I think). There is only only image. Make sure
you have Luci enabled in the build.
If you get tired of entering your IP address. Pick 4.
printenv
setenv ipaddr xxxxx
saveenv
reset
Messing with choices 8 and 9 on the menu will give you heart burn.
You can do it but be prepared with a JTAG.
On Wed, Oct 2, 2013 at 5:24 AM, jonsm...@gmail.com <jonsm...@gmail.com>
wrote:
There are several things broken on the AsiaRF build.
1) The build system has broken for things with hyphens in the name
2) The rt5350 ethernet switch will not function unless VLAN tagging is
turned on.
This patch will get it going again.
On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin
<michel.stem...@wanadoo.fr> wrote:
> I had a similar issue with another board: it looks like the OpenWrt
> build
> system doesn't like board names containing a dash sign ("-"), try
> renaming
> it.
>
> Le 2 oct. 2013 ? 03:30, Shawn Lewis <shle...@gmail.com> a ?crit :
>
> I'm not getting factory/sysupgrade images for the ramips asiarf
> target.
>
> If I build the default target profile I get all the other ramips
> images.
> If
> I manually select "Asiarf AWM002-EVB" I get vmlinux and other
> precursors
> to
> the actual image, but no flashable factory/sysupgrade images.
>
> Tried from trunk as of yesterday evening PST:
>
> svn://svn.openwrt.org/openwrt/trunk@38267
>
> and
>
> svn://svn.openwrt.org/openwrt/trunk@37561
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
--
Jon Smirl
jonsm...@gmail.com
------------------------------
Message: 6
Date: Wed, 2 Oct 2013 13:38:46 -0700
From: Shawn Lewis <shle...@gmail.com>
To: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: [OpenWrt-Devel] AsiaRF build, no images output
Message-ID:
<CAMR0Sc_KADgNc_RR_F_mpSNmDAxWit=SO8U1t=ubronn57b...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I should be using the sysupgrade image then?
On Wed, Oct 2, 2013 at 12:09 PM, jonsm...@gmail.com
<jonsm...@gmail.com>wrote:
On Wed, Oct 2, 2013 at 3:05 PM, Shawn Lewis <shle...@gmail.com> wrote:
> Progress, thanks! I now have the sysupgrade image, but no factory
> image.
I
> noticed that factory images aren't generated for a few of the other
ramips
> boards as well.
Just start the board with the UART connected and pick update the
system image (choice 2 I think). There is only only image. Make sure
you have Luci enabled in the build.
If you get tired of entering your IP address. Pick 4.
printenv
setenv ipaddr xxxxx
saveenv
reset
Messing with choices 8 and 9 on the menu will give you heart burn.
You can do it but be prepared with a JTAG.
>
>
> On Wed, Oct 2, 2013 at 5:24 AM, jonsm...@gmail.com <jonsm...@gmail.com>
> wrote:
>>
>> There are several things broken on the AsiaRF build.
>> 1) The build system has broken for things with hyphens in the name
>> 2) The rt5350 ethernet switch will not function unless VLAN tagging is
>> turned on.
>>
>> This patch will get it going again.
>>
>> On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin
>> <michel.stem...@wanadoo.fr> wrote:
>> > I had a similar issue with another board: it looks like the OpenWrt
>> > build
>> > system doesn't like board names containing a dash sign ("-"), try
>> > renaming
>> > it.
>> >
>> > Le 2 oct. 2013 ? 03:30, Shawn Lewis <shle...@gmail.com> a ?crit :
>> >
>> > I'm not getting factory/sysupgrade images for the ramips asiarf
target.
>> >
>> > If I build the default target profile I get all the other ramips
images.
>> > If
>> > I manually select "Asiarf AWM002-EVB" I get vmlinux and other
precursors
>> > to
>> > the actual image, but no flashable factory/sysupgrade images.
>> >
>> > Tried from trunk as of yesterday evening PST:
>> >
>> > svn://svn.openwrt.org/openwrt/trunk@38267
>> >
>> > and
>> >
>> > svn://svn.openwrt.org/openwrt/trunk@37561
>> >
>> > _______________________________________________
>> > openwrt-devel mailing list
>> > openwrt-devel@lists.openwrt.org
>> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >
>> >
>> > _______________________________________________
>> > openwrt-devel mailing list
>> > openwrt-devel@lists.openwrt.org
>> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >
>>
>>
>>
>> --
>> Jon Smirl
>> jonsm...@gmail.com
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20131002/78b3e5b7/attachment.html>
------------------------------
Subject: Digest Footer
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
------------------------------
End of openwrt-devel Digest, Vol 94, Issue 7
********************************************
