On Wed, Oct 2, 2013 at 4:38 PM, Shawn Lewis <shle...@gmail.com> wrote:
> I should be using the sysupgrade image then?
/openwrt/bin/ramips/openwrt-ramips-rt305x-awm002-evb-8M-squashfs-sysupgrade.bin
>
>
> On Wed, Oct 2, 2013 at 12:09 PM, jonsm...@gmail.com <jonsm...@gmail.com>
> wrote:
>>
>> On Wed, Oct 2, 2013 at 3:05 PM, Shawn Lewis <shle...@gmail.com> wrote:
>> > Progress, thanks! I now have the sysupgrade image, but no factory image.
>> > I
>> > noticed that factory images aren't generated for a few of the other
>> > ramips
>> > boards as well.
>>
>> Just start the board with the UART connected and pick update the
>> system image (choice 2 I think). There is only only image. Make sure
>> you have Luci enabled in the build.
>>
>> If you get tired of entering your IP address. Pick 4.
>> printenv
>> setenv ipaddr xxxxx
>> saveenv
>> reset
>>
>> Messing with choices 8 and 9 on the menu will give you heart burn.
>> You can do it but be prepared with a JTAG.
>>
>> >
>> >
>> > On Wed, Oct 2, 2013 at 5:24 AM, jonsm...@gmail.com <jonsm...@gmail.com>
>> > wrote:
>> >>
>> >> There are several things broken on the AsiaRF build.
>> >> 1) The build system has broken for things with hyphens in the name
>> >> 2) The rt5350 ethernet switch will not function unless VLAN tagging is
>> >> turned on.
>> >>
>> >> This patch will get it going again.
>> >>
>> >> On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin
>> >> <michel.stem...@wanadoo.fr> wrote:
>> >> > I had a similar issue with another board: it looks like the OpenWrt
>> >> > build
>> >> > system doesn't like board names containing a dash sign ("-"), try
>> >> > renaming
>> >> > it.
>> >> >
>> >> > Le 2 oct. 2013 à 03:30, Shawn Lewis <shle...@gmail.com> a écrit :
>> >> >
>> >> > I'm not getting factory/sysupgrade images for the ramips asiarf
>> >> > target.
>> >> >
>> >> > If I build the default target profile I get all the other ramips
>> >> > images.
>> >> > If
>> >> > I manually select "Asiarf AWM002-EVB" I get vmlinux and other
>> >> > precursors
>> >> > to
>> >> > the actual image, but no flashable factory/sysupgrade images.
>> >> >
>> >> > Tried from trunk as of yesterday evening PST:
>> >> >
>> >> > svn://svn.openwrt.org/openwrt/trunk@38267
>> >> >
>> >> > and
>> >> >
>> >> > svn://svn.openwrt.org/openwrt/trunk@37561
>> >> >
>> >> > _______________________________________________
>> >> > openwrt-devel mailing list
>> >> > openwrt-devel@lists.openwrt.org
>> >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > openwrt-devel mailing list
>> >> > openwrt-devel@lists.openwrt.org
>> >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Jon Smirl
>> >> jonsm...@gmail.com
>> >>
>> >> _______________________________________________
>> >> openwrt-devel mailing list
>> >> openwrt-devel@lists.openwrt.org
>> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >>
>> >
>> >
>> > _______________________________________________
>> > openwrt-devel mailing list
>> > openwrt-devel@lists.openwrt.org
>> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> >
>>
>>
>>
>> --
>> Jon Smirl
>> jonsm...@gmail.com
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
--
Jon Smirl
jonsm...@gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
