Added Asmax AR 1004g router
Signed-off-by: Adrian Feliks <me...@o2.pl>
----------------------------------------------------------------------------------
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -67,7 +67,6 @@
#define CT6373_SPI_GPIO_CLK 6
#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
-
static struct board_info board;
/*
@@ -1915,6 +1914,50 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_96348gw_10_AR1004G = {
+ .name = "AR1004G",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet1 = 1,
+
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "AR1004G:green:inet",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "AR1004G:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "AR1004G:red:power",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
#endif
/*
@@ -4075,6 +4118,7 @@ static const struct board_info __initcon
&board_96348A_122,
&board_CPVA502plus,
&board_96348W3,
+ &board_96348gw_10_AR1004G,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index d7f6c3a..d71f337 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -34,7 +34,8 @@ CT6373-1 |\
D-4P-W |\
"F@ST2604" |\
RTA1320_16M |\
-V2110)
+V2110 |\
+AR1004G)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 7c449ae..ad05853 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -121,6 +121,10 @@ brcm63xx_detect() {
brcm63xx_has_reset_button="true"
ifname=eth0
;;
+ AR1004G)
+ status_led="AR1004G:green:power"
+ brcm63xx_has_reset_button="true"
+ ;;
*)
;;
esac
diff --git a/target/linux/brcm63xx/image/Makefile
b/target/linux/brcm63xx/image/Makefile
index dc11c33..79f1fb8 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -289,6 +289,9 @@ define Image/Build
# Netgear CVG834G
$(call Image/Build/HCS,$(1),cvg834g,a020,0001,0022,$(KDIR)/vmlinux)
+ # Asmax AR 1004g
+ $(call Image/Build/CFEFIXUP,$(1),96348GW-10,AR1004G,6348,AR1004G)
+
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
$(call Image/Build/Initramfs)
endif
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
