Hi Hauke,
Booting a pretty decent x86 OpenWrt within KVM gives me a bunch of
Symbol errors in b44:
[ 2.291153] b44: Unknown symbol ssb_device_is_enabled (err 0)
[ 2.294154] b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
[ 2.298384] b44: Unknown symbol ssb_bus_may_powerdown (err 0)
[ 2.302220] b44: Unknown symbol ssb_pcihost_register (err 0)
[ 2.305303] b44: Unknown symbol ssb_device_disable (err 0)
[ 2.308565] b44: Unknown symbol ssb_device_enable (err 0)
[ 2.311455] b44: Unknown symbol ssb_driver_unregister (err 0)
[ 2.314884] b44: Unknown symbol __ssb_driver_register (err 0)
[ 2.318307] b44: Unknown symbol ssb_bus_powerup (err 0)
[ 2.319097] b44: Unknown symbol ssb_clockspeed (err 0)
[ 2.319871] b44: Unknown symbol ssb_dma_translation (err 0)
Looks as if this was introduced by your commit:
commit 5e65885775366154675d7ad9c4376f770302555c
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sun Jul 14 12:59:00 2013 +0000
brcm47xx: do not load the kernel modules needed for Ethernet manually
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
Maybe its enough to just update the Autoload priority of ssb to
something < 19 so
it gets loaded before b44?
Or should we just use the lower priority on the brcm47xx target?
Thanks,
Helmut
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
