I have enabled earlyprink and this not help. I think there is a problem with toolchain or somethink else.
2013/6/23 Florian Fainelli <flor...@openwrt.org>: > Hi, > > Le 23/06/2013 12:58, Jacek Kikiewicz a écrit : > >> I can see you are running kernel from memory. >> I had similar problem when doing this. >> I'd advice two things to start with: >> 1. Flash kernel somewhere and try to run it from there >> OR >> 2. Put it into different spot in memory and then try booting (I had best >> results with end of memory). > > > You might want to also enable earlyprintk support from menuconfig -> Global > build settings -> Kernel build options -> Enable earlyprintk. > > Your load adress and entry point seem to be correct because you are reaching > the zImage decompressor output, however the kernel seems be failing very > early, prior to initializing a console device. > > >> >> >> On 06/23/2013 10:57 AM, Artur Wronowski wrote: >>> >>> I am working on it. >>> >>> I have some problem with boot kernel, it hangs: >>> >>> U-Boot# bootm 0x80200000 >>> ## Booting kernel from Legacy Image at 80200000 ... >>> Image Name: Linux >>> Image Type: ARM Linux Kernel Image (uncompressed) >>> Data Size: 1649712 Bytes = 1.6 MiB >>> Load Address: 80008000 >>> Entry Point: 80008000 >>> Verifying Checksum ... OK >>> Loading Kernel Image ... OK >>> OK >>> >>> Starting kernel ... >>> >>> Uncompressing Linux... done, booting the kernel. >>> >>> My target files (need clean up) is at >>> https://www.dropbox.com/home/Public/bbb/am33x >>> >>> Maybe someone can help. >>> >>> 2013/5/14 Hui HU <michaelhu...@gmail.com>: >>>> >>>> Would you share some useful information? Any link or document? Thank >>>> you. >>>> >>>> Hui >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >>>> >>> >>> >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Pozdrawiam, Artur Best regards, Artur http://artekw.net / http://digi-led.pl / GG: 1518171 / Jabber: art...@jabbim.pl _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
